5 x 120 conversion?
Moderator: martauto
-
Mike-
- E30 Zone Newbie

- Posts: 99
- Joined: Fri Apr 13, 2012 11:00 pm
Thought the title might get some attention for people telling me to use the search bar!
HOWEVER, I know the work involved with this and frankly it's far too much to justify.
I really want to keep my E30 stock-looking, but the BBS wheels from E30s are a bit weak, I'd like something with a bit of dish, which has me looking at E34 items, which of course are 5x120.
eBay Wheels
See above for an example.
I've heard of wheels in the past having the bolt holes welded and then redrilled in the correct PCD. Is this something anyone has done before? As there's centrecaps it'll cover up any of the mess - or is this quite dangerous, along with steel banding etc.
Or are there any 4x100 wheels I've missed that are similar to these? Gotta be OEM
Opinions welcome.
Mike.
HOWEVER, I know the work involved with this and frankly it's far too much to justify.
I really want to keep my E30 stock-looking, but the BBS wheels from E30s are a bit weak, I'd like something with a bit of dish, which has me looking at E34 items, which of course are 5x120.
eBay Wheels
See above for an example.
I've heard of wheels in the past having the bolt holes welded and then redrilled in the correct PCD. Is this something anyone has done before? As there's centrecaps it'll cover up any of the mess - or is this quite dangerous, along with steel banding etc.
Or are there any 4x100 wheels I've missed that are similar to these? Gotta be OEM
Opinions welcome.
Mike.
-
Cook318IS
- E30 Zone Addict

- Posts: 4586
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
What if the wheels look pretty OEM but aren't?


Last edited by Cook318IS on Fri Aug 24, 2012 9:54 pm, edited 1 time in total.

-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
hub adaptors?
-
Mike-
- E30 Zone Newbie

- Posts: 99
- Joined: Fri Apr 13, 2012 11:00 pm
I thought adaptors but E34 offsets will already be pretty low without having them spaced out another 25mm. I want to keep chunky tyres to keep it OEM so running stretch isn't an option.
-
fearlessphil
- E30 Zone Newbie

- Posts: 190
- Joined: Mon Jun 25, 2012 11:00 pm
im not actually that fussed about 'oem' in fact i hate alot of VW OEM enthusiast' (ok even though modern parts are 1000 times better than origonal in every way i must keep it origonal because im a comlete ****!!!) but i do like wheels that look like they could be OEM but most are 5x120 i wouli love to know if welding is an option or if a 5 stud convertion is viable?
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Filling and redrilling is possible, I know of 1 person on here (cant remember the name) who has had it done. Whilst he has had no problems, there will always be questions regarding welding ally on something as important as a wheel.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
You can get 18mm thick adapter from a US crowd, they look like a good job and not as thick as some others. You could look for 4x100 RS' or RM's and widen them?!
-
Mike-
- E30 Zone Newbie

- Posts: 99
- Joined: Fri Apr 13, 2012 11:00 pm
I've had splits in the past and can't really be bothered with them! 18mm might be OK, I'd feel safer with those than redrilling.
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Not sure if this works:

These guys have them: http://www.8380labs.com/products/42-dra ... s-adapters

These guys have them: http://www.8380labs.com/products/42-dra ... s-adapters
-
fearlessphil
- E30 Zone Newbie

- Posts: 190
- Joined: Mon Jun 25, 2012 11:00 pm
they seem good except the price! $200 a pair i suppose thats not to bad though
-
Motorhole
- E30 Zone Addict

- Posts: 2395
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: Cheshire
e30.de do hub adapters too iirc, but for the price you're as well doing the complete 5-stud swap. I'm sure the weld filling is perfectly feasible but would expect it to set you back £50-£100 per wheel.
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
would vw hub adaptors fit ok? ive seen loads of golf etc running e30 wheels...
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
Go with adaptors, if your dead set on 5 x 120, honest opinion it's alot of effort for some pretty boring wheels, there are lots of oem looking wheels in a 4 x 100
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
VW are 4x100, so the E30 wheels fit anyway (other than offset being slightly out). I think the 5 stud VW is 5X112, so the adaptors are better as there is no overlap - 1 hole will overlap slightly when going 4x100 to 5x120.shanehaward wrote:would vw hub adaptors fit ok? ive seen loads of golf etc running e30 wheels...
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
i know, i ment would vw 4x100 work?jmc330i wrote:VW are 4x100, so the E30 wheels fit anyway (other than offset being slightly out). I think the 5 stud VW is 5X112, so the adaptors are better as there is no overlap - 1 hole will overlap slightly when going 4x100 to 5x120.shanehaward wrote:would vw hub adaptors fit ok? ive seen loads of golf etc running e30 wheels...
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
I'm confused.... You want to use VW 4x100 adaptors to run E30 wheels which are 4x100??
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
no!!! lol
asking about the vw adaptors(4x100 to 5x120 or 5x130 etc ect..)because they are always on ebay second hand, just asking if you can use them because the centre bore is different
asking about the vw adaptors(4x100 to 5x120 or 5x130 etc ect..)because they are always on ebay second hand, just asking if you can use them because the centre bore is different
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Lol, it was late!
I've asked that before, but no answers. I guess it could be same as using the G60 discs on an E30 - you need to open the centre bore up a little, but I don't know if that would work or could be done on the adaptors.
I've asked that before, but no answers. I guess it could be same as using the G60 discs on an E30 - you need to open the centre bore up a little, but I don't know if that would work or could be done on the adaptors.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
The vw centre bore is exactly the same as the e30 one. Vw adapters will work fine.
5x130 adapters are not that expensive as the 130mm pcd is wide enough that the holes don't clash.
4x100-5x100 are again easy as they just share a hole.
4x100 to 5x112 or 120 are tricky because no matter where you try and align the studs there will always be an overlap which means some sort of insert so the adaptor can bolt over the top of the stud.
5x130 adapters are not that expensive as the 130mm pcd is wide enough that the holes don't clash.
4x100-5x100 are again easy as they just share a hole.
4x100 to 5x112 or 120 are tricky because no matter where you try and align the studs there will always be an overlap which means some sort of insert so the adaptor can bolt over the top of the stud.
cheers,
harry
harry
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
I cant find the particular WMS brake kit thread, but it says the centre bore of the VW discs used in their kits need enlarging to fit the E30 hub.harry_p wrote:The vw centre bore is exactly the same as the e30 one. Vw adapters will work fine.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
Because the BMW hub is wider where the disk sits. The actual hub that the wheels sit on is exactly the same size.
People have been bolting BMW wheels on vws and vw wheels on bmws for decades.
People have been bolting BMW wheels on vws and vw wheels on bmws for decades.
cheers,
harry
harry
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Ah, I think I get you - the hub tapers out at the disc mounting face, so the inner 1mm of the disc need removing?harry_p wrote:Because the BMW hub is wider where the disk sits. The actual hub that the wheels sit on is exactly the same size.
And yes, wheels have been swapped between BM and VW for years, but people have also swapped wheels with the wrong centre bore for years (without using spigot rings etc) like BM wheels on Rovers, so just wanted to clear up any confusion.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Mike- wrote:
I really want to keep my E30 stock-looking, but the BBS wheels from E30s are a bit weak, I'd like something with a bit of dish, which has me looking at E34 items, which of course are 5x120.
Or are there any 4x100 wheels I've missed that are similar to these? Gotta be OEM
How about 4x100 BBS Mahle's? 15x7j ET13 so chunky rubber can still be used, they have a 2" dish and they were OEM, albeit they were on E21's but still OEM.
Ive had a couple of sets on E30's
Here's my current set that were found in a cellar in Germany.


They now look like this..

Some old pics of my E30 with a staggered set on (7j & 6j)
http://www.e30zone.net/modules.php?name ... 29&start=0
Expect to pay about £250 for a rough set and around £500+ for a good set, a mint set sold for £800 on here last year but thats the most ive ever seen them go for, but the were in perfect condition.
My last set (the ones in the link) sold for £550 and the guy traveled all the way down from Scotland to the midlands to collect
Cool old skool wheels FTW
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..

