Wooden gear knob refurb ?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sun Aug 19, 2012 11:42 pm

Ive got an alpina wooden gear knob and its in nice condition, but im wondering how they were from new are they just natural wood finish when new or any sort of laquer or anything ? and if therre is anything that can be done to re finish it or can they be polished to remove scratches or any sort of treatment/protective products can be used ?

also does anyone have the bmw part number for the emblem plaque things for the top ?if they can still be bought from bmw ?


only other option is these on ebay, but would they be rubbish and not look original ?

http://www.ebay.co.uk/itm/160557372710? ... 1423.l2649

thanks :cool:
User avatar
Emm3
E30 Zone Regular
E30 Zone Regular
Posts: 866
Joined: Sat Apr 08, 2006 11:00 pm

Post Mon Aug 20, 2012 5:42 am

I know wooden furniture is usually lacquered so if it is made out of real wood it should have a lacquer over it. If its chipped then it will need to be flattened and re done but if it's lightly scratched I'm sure a cutting compound should be able to sort it.
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Mon Aug 20, 2012 8:31 am

A lacquered finish doesnt get absorbed into the timber below, if it gets chipped off then removing it all and recoating is the best option. An oiled finish does get absorbed and small areas of damage can usually be corrected by light rubbing down and reapplication of the same finish.
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 12:44 pm

so who would you get to do such a job ? a local cabinet maker/furniture expert or something ? any idea what sort of laqeur is used ? or varnish maybe ? i wouldnt want to mess it up mind

heres my one, its a nice wooden finish only a few light marks, and no sign of any old laquer or anything...

Image

Image

Image

reason i asked if they were original laquerd from new is i saw this one on ebay and you can see some old laquer remains

Image

Image
User avatar
Rich320I
E30 Zone Camper
E30 Zone Camper
Posts: 1272
Joined: Tue Dec 06, 2011 11:00 pm
Location: Worcester

Post Mon Aug 20, 2012 1:02 pm

no expert,
but it looks like it should have been laquered as the grain in the wood is very open on yours polsta, has been stripped before?. just when iv dipped/ stripped wooden doors etc they have a very similar open grain appearance prior to refinishing. :)
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 1:09 pm

i have no idea i only got it on saturday,although them close up camera pics show that, when like right now i am looking at it from a few feet away or you hold it in your hand, it is a nice natural smooth finish and looks good

i just wondered how they look/are finished when brand spankers ? and if i should/could re finish it like that
User avatar
Rich320I
E30 Zone Camper
E30 Zone Camper
Posts: 1272
Joined: Tue Dec 06, 2011 11:00 pm
Location: Worcester

Post Mon Aug 20, 2012 1:12 pm

no idea on the oem finish mate, someone else will have to step in there, but the one you have looks like its been dipped/stripped and needs to be refinished. it looks alot more matt than the knob in the other pictures.

if its already been dipped refinishing is easy though bud, :)
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 1:14 pm

cool, well theres no remains of any previous finish on it unlike the other one there where you can clearly see laquer remains

surely soemone on here will know, are there different types of laquer for this sort of thing ?
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 1:22 pm

cant even find much on google bizzarly

this thread is about it

http://www.alfaowner.com/Forum/alfa-164 ... urb-2.html

they talk of re laquer, and re varnish

this place is also linked (ive sent them a message)

http://www.steeringwheelrestoration.co.uk/
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Mon Aug 20, 2012 6:19 pm

I would wire wool the surface and paint it with this

http://www.ronseal.co.uk/products/ultra-tough-varnish

For a brush free finish try fixing a wire into the knob and dipping it in the tin. Leave to dry over a piece of newspaper to allow the excess to run off.

Dont dip it into the tin and let liquid run into the drilled out center.
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Mon Aug 20, 2012 6:30 pm

It would have had a laquered finish when new. Not keen on the oil based home products as they can go tacky with constant use from the natural oils in the skin. Hence most door furniture is either metal, glass or plastic.

I'd go with a high gloss clear coat flatted between coats. A 2k clear coat would be most hard wearing.
B7's Motto. "If it's French, BURN IT!!!!!!"
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Mon Aug 20, 2012 6:41 pm

Looking at those pics again, you sure thats a genuine alpina knob? Looks too round at the top. Should be more of a flattened squashed top. Like the mushroom early knobs.
B7's Motto. "If it's French, BURN IT!!!!!!"
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 6:56 pm

ok thanks, so with the high gloss clear coat would that be a spray or brush on ? ie what stuff would i buy ? although id maybe be better getting it done by someone who knows what they are doing ?

i preume its a genuine one, i know the pics do make it look rounded i was trying to capture the wood not the shape, it is a proper tech 1 mushroom style knob,it looks and feels right to me and looks to be the same as the other one in the pic above

heres the pics from the for sale thread, is it genuine ?

Image

Image
Last edited by polsta on Mon Aug 20, 2012 7:02 pm, edited 1 time in total.
beemerbird
Married to the E30 Zone
Married to the E30 Zone
Posts: 8620
Joined: Mon Mar 24, 2008 11:00 pm
Location: Suffolk

Post Mon Aug 20, 2012 7:00 pm

If you don't want to do it yourself, you need a French polisher. Just be prepared for him to hang up the phone on you when you say you want to have your knob sorted out :D
If it ain't broke, fix it till it is
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 7:04 pm

:D "bird of internet said youd sort my knob out and get it back to its former glory"

would a french polisher be able to laquer it or what would they do ? would maybe be expensive, yet there will be some local i could go speak too might not take them long , but i could do with knowing what i want done 1st do they dont mess it up
beemerbird
Married to the E30 Zone
Married to the E30 Zone
Posts: 8620
Joined: Mon Mar 24, 2008 11:00 pm
Location: Suffolk

Post Mon Aug 20, 2012 7:09 pm

French Polishers specialise in final treatment of wooden items to bring out the beauty of the wood, and get them to the required / not required shine.

Seriously, I'd have a go yourself. IIRC DHFis works with wood (cabinet maker?) so I'd follow his advice. :D
If it ain't broke, fix it till it is
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 7:13 pm

il seek advice/get a quote of a local french polisher just to see what they say and if i dont shat myself at the price

dhfis...is it something you could do at work in a professional finish way ?
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Mon Aug 20, 2012 7:31 pm

Yes that is genuine, but it certainly didn't look like it in the first lot of pics. Shame about the badge, and they are not available on their own I've checked.

I have one that needs a new badge, maybe Pukar could do some for us, he was talking about doing Alpina wheel centres with a dome. I have one of those ebay efforts, they are nice enough quality but not right.

I reckon 2k clear for the topcoat.
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 7:41 pm

thats good to know 8) ,whats the finish like on yours any chance of a few pics inc close ups ? wonder if pukar can do them then, is there no way they can be bought new ? have you contacted alpina or synter or just bmw ?


what could be done before a 2k coat ? any sort of sanding/polishing to get the wood as nice as possible 1st ?

you mean just something like this and build up coats ?

http://www.ebay.co.uk/itm/2k-Clear-Spra ... vi-content

would 2k laquer be what my cars done in ? i could get him to do it with the gun when he paints my car ?
B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15841
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Post Mon Aug 20, 2012 7:50 pm

Blimey. Looks different now. Yep its a pukka one.

Your painter could do it in clear coat. Would be very hard wearing BUT be careful not to build it up too thick in the indent for the badge. Or the badge won't fit properly.
B7's Motto. "If it's French, BURN IT!!!!!!"
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 8:00 pm

is that 2k clear coat what hel be using ? im still going to take it to a french polisher for a look/chat and just see what they say, and maybe get the wood to its best aswell if they cant laqueur it or suggest another way

i could leave the alpina decal in when doing it with a big blob of blu tack in the middle ao after spraying just pull it out ? got it in my hand right now and the decal fits 100% perfect, im thinking even a couple of coats might effect that like you say

or- whats the thoughs on leaving it a natural wooden finish and just get the wood buffed up and polished, least then theres no future laqueur wear to worry about

some pics of a brand new one would be just the ticket ?
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Mon Aug 20, 2012 8:04 pm

polsta wrote:idhfis...is it something you could do at work in a professional finish way ?
No, I take my stuff to a pro with a spray booth.

If I was you I'd give it a go and if it looks wrong then rub it down and start again.
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Mon Aug 20, 2012 8:06 pm

Last question first, yes get it done when car gets cleared, that way you'll get it for free and the best quality :D

The OEM finish is high gloss the 2k will achieve this, as for prep, give it a sand with some fine grit, 1200 will do, then give it a clean with white spirit, this will make the grain swell a little, sand again, give it a clean and its ready for the clear.

The reason for the second sand is the swolen grain of the wood will be removed, so when the clear hits it it won't swell further, giving a better finish.

The badge is only available as part of the knob. The knob is NLA :(
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 8:22 pm

:( thats a bum deal, why dont the ebay makers replicate the oem look and theyd appeal/sell a lot more surely, then again my car isnt an alpina so i could maybe just use a new round bmw on, im not even sure il be using this in my car anyway but it was rude not to at the price and its another choice i have

so when i sand it, is there any particular way to sand or not to ? ie circular or long straiht up n down motions with the grain and never against/scross or anything like that ? , and should i wait any lenth of time between the white spirit and 2nd sanding or should the white spirit be cleaned off 1st ?

would use it wet or dry ? ive got some 1200 and 1500 in my garage
Low_E30
E30 Zone Camper
E30 Zone Camper
Posts: 1121
Joined: Wed Jan 12, 2005 11:00 pm

Post Mon Aug 20, 2012 8:48 pm

Use these guys, based out in Iver, cost may be on the upside but then again can't see it being so high for just one piece like a gearknob... Remember you get what you pay for..

Seen their work on a couple of Mercs on another forum, and it was exquisite, and will be using them on a Merc of mine in due course...

http://www.silvercrest-woodtrim.co.uk/contact.html
E30 BMW 325i Cabriolet M-tech1 + Hardtop
W201 Mercedes 190E 2.5-16
W124 Mercedes E220 AMG Cabriolet + Hardtop
S124 Mercedes Estate AMG
C126 Mercedes 500 SEC
W210 Mercedes E55 AMG (2001 Facelift)
Jaguar XJR Supercharged (2002)
snakebrain
E30 Zone Addict
E30 Zone Addict
Posts: 3683
Joined: Tue Aug 11, 2009 11:00 pm

Post Mon Aug 20, 2012 9:03 pm

B7 wrote:Blimey. Looks different now. Yep its a pukka one.
Emmmm, are you 100% sure the one in the for sale thread and the one you actually got are the same? The shape looks totally different.

I wouldn't put it past some chancer with a lathe to turn something that looks about right and slap a knackered Alpina badge on it....
fearlessphil
E30 Zone Newbie
E30 Zone Newbie
Posts: 190
Joined: Mon Jun 25, 2012 11:00 pm

Post Mon Aug 20, 2012 9:11 pm

maggspower wrote:as for prep, give it a sand with some fine grit, 1200 will do, then give it a clean with white spirit, this will make the grain swell a little, sand again, give it a clean and its ready for the clear.

The reason for the second sand is the swolen grain of the wood will be removed, so when the clear hits it it won't swell further, giving a better finish.
Im a joiner by trade and dabble in a little wood carving Maggspower is spot on with the prep should be able the get is silky smooth!

If it were me to finish i would use 2 or 3 coads of clear bees wax. Lash it in the oven untill its warm / hot to touch say 40 degrees C and lay a thick coat on first (the heat will help it to penetrate.) Leave an hour and polish off, give it a light final sand with the 1200 and apply a couple more coats at room temp it will come up lovely!
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Mon Aug 20, 2012 9:12 pm

It takes many years of rough trade by council types to make a knob look that rough :(

I have just checked my knob collection :) and I can verify that new ones came completely smooth and gloss laquered
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 9:16 pm

Low_E30 wrote:Use these guys, based out in Iver, cost may be on the upside but then again can't see it being so high for just one piece like a gearknob... Remember you get what you pay for..

Seen their work on a couple of Mercs on another forum, and it was exquisite, and will be using them on a Merc of mine in due course...

http://www.silvercrest-woodtrim.co.uk/contact.html
nice one thanks, ive sent them an email to enquire
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 9:16 pm

pacerpete wrote:It takes many years of rough trade by council types to make a knob look that rough :(

I have just checked my knob collection :) and I can verify that new ones came completely smooth and gloss laquered
any chance of some pics please pete ? winkeye
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 9:17 pm

fearlessphil wrote:
maggspower wrote:as for prep, give it a sand with some fine grit, 1200 will do, then give it a clean with white spirit, this will make the grain swell a little, sand again, give it a clean and its ready for the clear.

The reason for the second sand is the swolen grain of the wood will be removed, so when the clear hits it it won't swell further, giving a better finish.
Im a joiner by trade and dabble in a little wood carving Maggspower is spot on with the prep should be able the get is silky smooth!

If it were me to finish i would use 2 or 3 coads of clear bees wax. Lash it in the oven untill its warm / hot to touch say 40 degrees C and lay a thick coat on first (the heat will help it to penetrate.) Leave an hour and polish off, give it a light final sand with the 1200 and apply a couple more coats at room temp it will come up lovely!
super, i think ive got bees wax here for my desk , have sent you a pm....
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 9:26 pm

and so what car is this for then Carl "Mr. Originality" polsta? :?




:snigger:
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Mon Aug 20, 2012 9:36 pm

to quote myself from the 1st page..

then again my car isnt an alpina so i could maybe just use a new round bmw one, im not even sure il be using this in my car anyway but it was rude not to at the price and its another choice i have

and would even look good just sat on my desk as an ornamental piece :cool:
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Tue Aug 21, 2012 11:46 am

Low_E30 wrote:Use these guys, based out in Iver, cost may be on the upside but then again can't see it being so high for just one piece like a gearknob... Remember you get what you pay for..

Seen their work on a couple of Mercs on another forum, and it was exquisite, and will be using them on a Merc of mine in due course...

http://www.silvercrest-woodtrim.co.uk/contact.html
they have said £45 for a full job on it 1 week turnaround
User avatar
Rich320I
E30 Zone Camper
E30 Zone Camper
Posts: 1272
Joined: Tue Dec 06, 2011 11:00 pm
Location: Worcester

Post Tue Aug 21, 2012 11:53 am

£45 beans to paint a knob, seems abit much to spend IMO. id have a go myself mate. but i am abit tight :)