General E30 related discussions -
Please put technical questions in E30 Tech Help forum below
Moderator: martauto
-
penton08
- E30 Zone Camper

- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
Post
Wed Aug 15, 2012 9:58 pm
jmc330i wrote:penton08 wrote:
JMC, The s50 is great and I am glad i done it, but the m52 is as quick in the real world and for a track car it is better engine IMO. Lighter, and if it does go pop it is a couple of hundred pound for another engine.
Cool. I take it youre talking a fully stripped E30 with a worked on M52 against a fully larded up E30 with an S50?
I can understand the M52 making a better track car for the weight and price reasons etc, and I'm seriously thinking about it, but I'm thinking I'm gunna miss the grunt (and noise) that the S50 has, plus the sheer driveability in every gear.
The s50'd turd was as lardy as they come

Tech 2 kit, leatherzz, ICE, The lot!! and yes the track car is stripped bare with some engine fiddling.
The S50 wins hands down for looks, kudos and at anything over 100 MPH. A good mildly modded M52 wont feel slow mate, Danthe was actually quicker (only just) up the 1/4 mile with a m52 than my s50 both in full road trim.
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Post
Wed Aug 15, 2012 10:12 pm
So was my S50 - still fun though
I guess off the line, the M52 will be quicker with less mass to get moving and no dual mass flywheel to get spinning! I never did get rid of the DMF on my S50...

James
'91 325i Sport
'93 318i touring 16v
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Post
Wed Aug 15, 2012 10:14 pm
In bmx we have a saying called being chandlered. Where you do a trick and someone comes behind you and does it better....iv been chandlered on this thread. So many beautiful engine bays up! I need to get to work
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
blackE30indy
- E30 Zone Camper

- Posts: 1285
- Joined: Sun Mar 30, 2008 11:00 pm
- Location: leicester/uk
Post
Wed Aug 15, 2012 11:15 pm
Before
After

[/img]
Nearly done

-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Post
Wed Aug 15, 2012 11:49 pm
before...
After...
Looks pretty much the same now apart from a RD strut brace and 4 pot loom cover,
oh and the guts of the engine are totally different too.

Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..

-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Post
Wed Aug 15, 2012 11:56 pm
@ Indy, you not running heat shields on the exhaust manifold?
-
blackE30indy
- E30 Zone Camper

- Posts: 1285
- Joined: Sun Mar 30, 2008 11:00 pm
- Location: leicester/uk
Post
Wed Aug 15, 2012 11:58 pm
Yea will be mate,still fabricating them

-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Post
Thu Aug 16, 2012 12:01 am
Was gonna say, that might get a tad warm

-
blackE30indy
- E30 Zone Camper

- Posts: 1285
- Joined: Sun Mar 30, 2008 11:00 pm
- Location: leicester/uk
Post
Thu Aug 16, 2012 12:03 am
Definatly would need a heat shield or some sort of
Protection,as it does get hot under there with a turbo

-
bhups
- E30 Zone Regular

- Posts: 510
- Joined: Tue Nov 06, 2007 11:00 pm
Post
Thu Aug 16, 2012 12:20 pm
Dont think got a before but here is the after.
After:

-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Post
Thu Aug 16, 2012 12:28 pm
For those who've painted rocker covers and intake manifolds, what sort of paint did you use? Was normal automotive paint alright, or is this some sort of high-temp enamel?
And hi-build primer, or paint straight on metal?
And my before:
and after:

-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Post
Thu Aug 16, 2012 12:37 pm
Hi temp engine paint, painted straight to metal.
As i said above il make a guide once i get more paint cos im redoing it all
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Post
Thu Aug 16, 2012 12:55 pm
Still loads to do in my bay but its a hell of a lot better than it was!
Credit to Penton for hosing off the worst of it...

-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
Post
Thu Aug 16, 2012 1:05 pm
E30 zone - promoting adult illiteracy since 2004
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Post
Thu Aug 16, 2012 2:23 pm
Grrrmachine wrote:For those who've painted rocker covers and intake manifolds, what sort of paint did you use? Was normal automotive paint alright, or is this some sort of high-temp enamel?
And hi-build primer, or paint straight on metal?
I used Hammerite (aerosol) over 3 years on and it still looks new.

Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..

-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Post
Thu Aug 16, 2012 3:18 pm
Before (2.0i):
After a proper clean:
And now, a rebuilt 2.7 engine: (the air filter has gone!)

E30 Crazy!
-
goldysingh
- E30 Zone Regular

- Posts: 814
- Joined: Thu Jan 20, 2005 11:00 pm
- Location: London
Post
Thu Aug 16, 2012 4:59 pm
Ajsingh wrote:Before (2.0i):
After a proper clean:
And now, a rebuilt 2.7 engine: (the air filter has gone!)

Very nice, what colour is the rocker cover and inlet manifold painted?
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Post
Thu Aug 16, 2012 7:45 pm
Alright Goldy, the paint colour is Delphin Grey, to match the car
E30 Crazy!
-
goldysingh
- E30 Zone Regular

- Posts: 814
- Joined: Thu Jan 20, 2005 11:00 pm
- Location: London
Post
Thu Aug 16, 2012 9:45 pm
Ajsingh wrote:Alright Goldy, the paint colour is Delphin Grey, to match the car
Nice, I think I will end up doing mine like that.
It does look tidy.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Post
Thu Aug 16, 2012 10:26 pm
I wanted to colour match too but cant find colour matched heat proof paint?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Post
Thu Aug 16, 2012 10:39 pm

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Post
Thu Aug 16, 2012 10:42 pm
a 3.5! what the fuck is that thing! 5 series lump? e34?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Post
Thu Aug 16, 2012 10:46 pm
verde wrote:a 3.5! what the **** is that thing! 5 series lump? e34?
Trying...hard...to...resist...the...obvious...
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
Post
Thu Aug 16, 2012 10:47 pm
verde wrote:a 3.5! what the **** is that thing! 5 series lump? e34?
I believe it came from a Royal Navy destroyer that was being decommissioned. If you look in his cabin you'll see where you shovel the coal in.
(It's an M30B35 from an E24/E28/E34.)

-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
Post
Thu Aug 16, 2012 10:49 pm
suchy wrote:verde wrote:a 3.5! what the **** is that thing! 5 series lump? e34?
Trying...hard...to...resist...the...obvious...
Did the hard work for you!

-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Post
Thu Aug 16, 2012 10:50 pm
suchy wrote:verde wrote:a 3.5! what the **** is that thing! 5 series lump? e34?
Trying...hard...to...resist...the...obvious...
LOL
Young man, it's from an E35 535i


If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
mabz
- E30 Zone Squatter

- Posts: 1583
- Joined: Sat May 24, 2008 11:00 pm
- Location: cambridgeshire
Post
Thu Aug 16, 2012 10:50 pm

heres one of my old ones
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Post
Thu Aug 16, 2012 11:00 pm
goldysingh wrote:Ajsingh wrote:Alright Goldy, the paint colour is Delphin Grey, to match the car
Nice, I think I will end up doing mine like that.
It does look tidy.
Dips at Custom Cars. He did the inlet and rocker cover work and it cannot be faulted. Give him a shout!
E30 Crazy!
-
Phill172
- E30 Zone Camper

- Posts: 1117
- Joined: Wed Feb 20, 2008 11:00 pm
- Location: Basingstoke
Post
Fri Aug 17, 2012 8:26 am
Not the cleanest but it does the job for me, its a pain in the arse even keeping it this clean..

-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
Post
Fri Aug 17, 2012 8:42 am
verde wrote:I wanted to colour match too but cant find colour matched heat proof paint?
It really doesn't need to be heat proof paint, regular paint will withstand engine bay temperatures.
E30 zone - promoting adult illiteracy since 2004
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Post
Fri Aug 17, 2012 9:36 am
Some of my turd. (no before photos sadly).

-
kieran325
- Old Skooler

- Posts: 5015
- Joined: Sun Oct 30, 2005 11:00 pm
Post
Fri Aug 17, 2012 9:51 am
I've removed the strut brace since -

-
goldysingh
- E30 Zone Regular

- Posts: 814
- Joined: Thu Jan 20, 2005 11:00 pm
- Location: London
Post
Fri Aug 17, 2012 10:13 am
Ajsingh wrote:goldysingh wrote:Ajsingh wrote:Alright Goldy, the paint colour is Delphin Grey, to match the car
Nice, I think I will end up doing mine like that.
It does look tidy.
Dips at Custom Cars. He did the inlet and rocker cover work and it cannot be faulted. Give him a shout!
I might do, he is refurbishing my 17" and 18" azev a's at the moment so I might just give him the rocker cover and inlet manifold too.
I've seen his work, top notch.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Post
Fri Aug 17, 2012 10:45 am
Cloggy Saint wrote:verde wrote:I wanted to colour match too but cant find colour matched heat proof paint?
It really doesn't need to be heat proof paint, regular paint will withstand engine bay temperatures.
Really!? Aww excellent. Its way cheper and more colours available. Thanks.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift