induction kit.
Moderator: martauto
-
ameetgill1
- E30 Zone Regular

- Posts: 374
- Joined: Mon Mar 26, 2012 11:00 pm
guys I'm looking for a good induction kit not over the top? whats a good make
-
e30mtech
- E30 Zone Regular

- Posts: 430
- Joined: Wed Dec 05, 2007 11:00 pm
- Location: glenrothes, fife
no no no no no no no no no no
by the way i think no
that the answer you will get 90% on here
by the way i think no
that the answer you will get 90% on here
-
retroboyo
- E30 Zone Regular

- Posts: 459
- Joined: Mon Oct 30, 2006 11:00 pm
Money would be better spent on new oil, spark plugs and filters
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Basically they lose power rather than gain any. There was a thread a good while back with a fella at colleague who actually dyno tested the standard airbox against a few different filters and from what I remeber none of them was as good as the OEM one.
I can undertand why people want them as the sound is pretty good. But there is no performance gain to be had.
I can undertand why people want them as the sound is pretty good. But there is no performance gain to be had.
-
G-Bear
- E30 Zone Squatter

- Posts: 1631
- Joined: Wed Mar 12, 2008 11:00 pm
- Location: Hertfordshire
All the above really. Mine came with an aftermarket induction.. I put an OEM back on it and it ran so much smoother, didn't notice any lose in performance...
-
rix313
- E30 Zone Team Member

- Posts: 4970
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
The engine I have now was dyno tested with standard airbox and an expensive sealed carbon wiz bang induction kit and the standard airbox owned it.
So with that in mind if your desperate to have one it makes fack all difference what you get
So with that in mind if your desperate to have one it makes fack all difference what you get
-
e30-EVN
- Old Skooler

- Posts: 3382
- Joined: Sun Dec 13, 2009 11:00 pm
- Location: S.Wales
in 2 words.........
DONT BOTHER
bmw airboxes were designed to be the best induction could be, if it aint broke dont fix it
DONT BOTHER
bmw airboxes were designed to be the best induction could be, if it aint broke dont fix it
A 2 door e30 with 8 cylinders, what could be better

-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
I didnt beleive the zoners either and called them OEM fags...then i saw the proof in the video below. Put on a cone filter if you want it to rev a bit free-er but its not worth spending money on
[youtube][/youtube]
[youtube][/youtube]
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
reggid
- E30 Zone Squatter

- Posts: 1984
- Joined: Mon Jul 11, 2005 11:00 pm
- Location: Oz
slap a K&N panel and call it a day.......
E30 325is with M20B31
-
Dweller
- E30 Zone Newbie

- Posts: 155
- Joined: Mon Apr 16, 2012 11:00 pm
I hate the cheesy induction cone my 325 came with and ive still not got round to putting the original air box on but thats what i'll be doing for sure, to be fair it sounds awesome but yea the original one with regulate the air much better, and yea a panel filter might be the way to go if your arsed about trying to squeeze every last bit of bhp!
-
retroboyo
- E30 Zone Regular

- Posts: 459
- Joined: Mon Oct 30, 2006 11:00 pm
I've seen cars loose power with a panel filter, not worth doing imho
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Il pay u postage for itDweller wrote:I hate the cheesy induction cone my 325 came with and ive still not got round to putting the original air box on but thats what i'll be doing for sure, to be fair it sounds awesome but yea the original one with regulate the air much better, and yea a panel filter might be the way to go if your arsed about trying to squeeze every last bit of bhp!
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Dweller
- E30 Zone Newbie

- Posts: 155
- Joined: Mon Apr 16, 2012 11:00 pm
haha il let u kno when i get my hands on an airbox to replace it with!
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Im selling one for a tenner and postageDweller wrote:haha il let u kno when i get my hands on an airbox to replace it with!
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
reggid
- E30 Zone Squatter

- Posts: 1984
- Joined: Mon Jul 11, 2005 11:00 pm
- Location: Oz
when i did back to back to back testing it was worth about 3-4%. i then made my own OEM style box but with bigger panel filter and it was worth about 10hp gain at the topend. this is on a modified engine.retroboyo wrote:I've seen cars loose power with a panel filter, not worth doing imho
if your primary purpose is more hp the standard one can be improved without a doubt. The actual assembly is called a silencer by BMW which sheds some light in one of its functions is and the compromises this would cause if outright power was the goal.
unless you keep the air ingested as cool as the factory setup dont bother, the loss of charge density will more than offset any flow gains.
the other thing to consider is the harmonics the airfilter box is a large volume connected via a pipe and there are pressure waves than can be beneficial or detrimental depending on the pipe length, pipe size and box volume. so it is not merely flow and temperature to consider
E30 325is with M20B31
-
rix313
- E30 Zone Team Member

- Posts: 4970
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
I do love the way Ausies get the message across.verde wrote:I didnt beleive the zoners either and called them OEM fags...then i saw the proof in the video below. Put on a cone filter if you want it to rev a bit free-er but its not worth spending money on
[youtube][/youtube]
However seeing as they tested it on a turbo engine I'm not surprised there were little gains as the air gets heated up to buggery in the turbo any way. It’s whether the intercooler is doing its job or not (which it was from the test where they showed the intake temps being higher but the output being the same). IMO the test would hold more water/be more relevant if conducted on a naturally aspirated car.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
That was the point though. Theyv done it on loads of different cars turbo ans not turboed and the message is unless ur running huge bhp and boost u will either lose or not notice power gain
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
Verde have you personally dyno'd an e30 with its' OEM airbox on, and then a K&N 57i? or similar?
The air box design is different for each model, each engine, so this the clue is in that fact.. Remove the air box and it is removing a part which has been designed to provide the best performance.
A performance panel filter maybe, and induction kit, 'an expert on bulls you are not'
The air box design is different for each model, each engine, so this the clue is in that fact.. Remove the air box and it is removing a part which has been designed to provide the best performance.
A performance panel filter maybe, and induction kit, 'an expert on bulls you are not'
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
where does a k&n panel filter vs an oem paper one or whatever they are made from, fit in ?
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
I think the K&N does give a slight increase in performance, not something you'd notice though. However to allow the extra airflow that surely means it doesn't filter as much so more particals going through the engine.polsta wrote:where does a k&n panel filter vs an oem paper one or whatever they are made from, fit in ?
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Not claiming to have im just going by the results in the video. K and n panel filter in the standard housing appears to be bestBarx325i wrote:Verde have you personally dyno'd an e30 with its' OEM airbox on, and then a K&N 57i? or similar?
The air box design is different for each model, each engine, so this the clue is in that fact.. Remove the air box and it is removing a part which has been designed to provide the best performance.
A performance panel filter maybe, and induction kit, 'an expert on bulls you are not'
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
sure, but the car in the video you posted isn't a bmw which was my point..
in fact with a cone type you can easily take a dive in economy too
in fact with a cone type you can easily take a dive in economy too
-
Green
- E30 Zone Squatter

- Posts: 1698
- Joined: Wed Mar 17, 2010 11:00 pm
- Location: Santa Pod
I believe that's why they're oiled to catch more particles.Kedge wrote:I think the K&N does give a slight increase in performance, not something you'd notice though. However to allow the extra airflow that surely means it doesn't filter as much so more particals going through the engine.polsta wrote:where does a k&n panel filter vs an oem paper one or whatever they are made from, fit in ?

-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
True, but i wasnt defending cone filters.Barx325i wrote:sure, but the car in the video you posted isn't a bmw which was my point..
in fact with a cone type you can easily take a dive in economy too
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
lion_yo
- E30 Zone Regular

- Posts: 366
- Joined: Fri Sep 04, 2009 11:00 pm
- Location: Midlands, United Kingdom
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
serio?Cloggy Saint wrote:25bhp increase?
I didn't bother clicking the link


