turbo help
Moderator: martauto
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
A friend of dads is stripping their diesell vauxhall frontera....im being offered a garrett blower for 50 quid. If I get the blower and intercooler buy one of those ebay turbo 6 branches it should work out ok?
Edit. Obviously not as simple as that but surely the 320 block will handle it and itl give a little boost
Edit. Obviously not as simple as that but surely the 320 block will handle it and itl give a little boost
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Motorhole
- E30 Zone Addict

- Posts: 2395
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: Cheshire
iirc turbo diesel turbos dont last long on petrols. Petrol turbos spin at higher rpm and exhaust gas is at higher temps. Also given the changes youd have to make to your management, injectors etc it probably wouldnt prove cost effective compared to an engine swap.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Alright thanks motorhole. Il just wait til something else comes along. I might try get one off another car. I remember the mini ones are ok
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
What needs done aswell
Turbo
Intercooler
Bov or antlag
Manifold
The injectors and ecu? What needs done and can u buy parts?
Turbo
Intercooler
Bov or antlag
Manifold
The injectors and ecu? What needs done and can u buy parts?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Not sure how much boost you can get away with without having to go standalone, probably not a lot.
Then again if you dont really care if you blow the b20 up then i say go for it.
Then again if you dont really care if you blow the b20 up then i say go for it.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
There were a few threads from years ago where a chip was used, not sure if there off the shelf though,
WAR chips is ringing a bell.
WAR chips is ringing a bell.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Barx325i wrote:
One emote says a thousand words. When it comes to turbos I literally have noooo idea. Uum, I dont really wanna blow it up to be honest. Maybe a lumpy cam the 325 intake, 6 branch and one of speedtouches chips ( will be ordering soon dude ) will be fine for me atm. Maybe il port and balance everything if I get itchy again to do something. Probably best I stay away from snails
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
blackE30indy
- E30 Zone Camper

- Posts: 1285
- Joined: Sun Mar 30, 2008 11:00 pm
- Location: leicester/uk
I think you can run up to 7psi on the stock ecu safely,think you need a
M30 afm,and injectors,
Some one has done it on the forum somewhere

M30 afm,and injectors,
Some one has done it on the forum somewhere
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Even with 7psi, how much power are you going to get out of a boosted M20B20? About as much as a completely stock M20B25? But for more than it costs to do an M52B28? 
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
You are going to need to do a lot of research.
Have a good read through this:
http://www.e30tech.com/forum/showthread.php?t=3237
Have a good read through this:
http://www.e30tech.com/forum/showthread.php?t=3237
-
blackE30indy
- E30 Zone Camper

- Posts: 1285
- Joined: Sun Mar 30, 2008 11:00 pm
- Location: leicester/uk
That's trueGrrrmachine wrote:Even with 7psi, how much power are you going to get out of a boosted M20B20? About as much as a completely stock M20B25? But for more than it costs to do an M52B28?
-
staley_turbo
- E30 Zone Camper

- Posts: 1391
- Joined: Tue Jan 19, 2010 11:00 pm
- Location: Leicester
Unless your spending quite a lot to do it properly, it will be far easier and cheaper to go m52.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
ross_jsy wrote:You are going to need to do a lot of research.
Have a good read through this:
http://www.e30tech.com/forum/showthread.php?t=3237
Excellent ross thanks. Il get stuck in. As I say for now il just balance the one I have and get it abit smoother and then see what happens next year. I just got curious as all I heard when dad spoke was garrett turbo 50 quid with intercooler and though hmm...i might get that. Il read that thread
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift

