Where can I buy loweringkits 75-80mm?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
Brinkland
E30 Zone Newbie
E30 Zone Newbie
Posts: 116
Joined: Sun Dec 06, 2009 11:00 pm
Location: Denmark

Post Tue Jul 17, 2012 6:50 pm

steve_k wrote:@brinkland, I've got those rear springs with adjusters myself & while they are very good just make sure you keep the adjustable platform's clean & greased because if you don't they WILL seize up & refuse to budge.
Okay thanks, I had thought to remove the adjusting pieces, so that it is as low as possible :D
Brinkland

1985 Bmw e30 325e
User avatar
Brinkland
E30 Zone Newbie
E30 Zone Newbie
Posts: 116
Joined: Sun Dec 06, 2009 11:00 pm
Location: Denmark

Post Fri Jul 20, 2012 1:12 pm

installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
Brinkland

1985 Bmw e30 325e
nickso
E30 Zone Addict
E30 Zone Addict
Posts: 4396
Joined: Sat Jul 23, 2005 11:00 pm
Location: Go do that voodoo that you do so welllllllll!!

Post Fri Jul 20, 2012 1:41 pm

Springs are probably so short to make the drop that they will be loose when it's jacked up.
Image

'88 e30 328i M52 track bint.
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Fri Jul 20, 2012 3:33 pm

Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?

Insecure springs are nothing to worry about . When you go over a big bump, the worst that can happen is the spring becomes dislodged and digs into the tyre, you crash and die in a fireball .

A small price to pay for living on the jagged edge as a stancec0ck ! :)
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Fri Jul 20, 2012 3:43 pm

Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations. :roll:
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Fri Jul 20, 2012 3:45 pm

Andyboy wrote:
Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations. :roll:

What bump stops ? :?


It's a lifestyle, man :)
Sjoerd320i
E30 Zone Addict
E30 Zone Addict
Posts: 4035
Joined: Mon Jan 10, 2005 11:00 pm
Location: Heemskerk, Holland

Post Fri Jul 20, 2012 4:11 pm

Pictures 8)
Image
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Fri Jul 20, 2012 4:45 pm

I have jom cheap on front and custom gaz springs on rear and its low i must say ! Gaz will be the next choice on the next e30 tho
snakebrain
E30 Zone Addict
E30 Zone Addict
Posts: 3683
Joined: Tue Aug 11, 2009 11:00 pm

Post Fri Jul 20, 2012 6:39 pm

pacerpete wrote:
Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?

Insecure springs are nothing to worry about . When you go over a big bump, the worst that can happen is the spring becomes dislodged and digs into the tyre, you crash and die in a fireball .

A small price to pay for living on the jagged edge as a stancec0ck ! :)
Who says there are never any happy endings in real life? :D
User avatar
Brinkland
E30 Zone Newbie
E30 Zone Newbie
Posts: 116
Joined: Sun Dec 06, 2009 11:00 pm
Location: Denmark

Post Fri Jul 20, 2012 9:09 pm

Andyboy wrote:
Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations. :roll:
its only when the wheels not hit the ground, the springs are loose in the cups,
Brinkland

1985 Bmw e30 325e
User avatar
Brinkland
E30 Zone Newbie
E30 Zone Newbie
Posts: 116
Joined: Sun Dec 06, 2009 11:00 pm
Location: Denmark

Post Fri Jul 20, 2012 9:12 pm

but you can only get one length short shock absorbers? or you can get several different lengths short shock absorbers?
Brinkland

1985 Bmw e30 325e
BMWE30325
E30 Zone Camper
E30 Zone Camper
Posts: 1113
Joined: Sat Jul 24, 2010 11:00 pm
Location: South East London

Post Sat Jul 21, 2012 9:41 am

any pics?
User avatar
billcarr182
E30 Zone Newbie
E30 Zone Newbie
Posts: 121
Joined: Mon Apr 06, 2009 11:00 pm

Post Sat Jul 21, 2012 9:50 am

rh306 wrote::)

Image
Here it would appear that the bonnet bra has failed to prevent stone chips...
User avatar
Brinkland
E30 Zone Newbie
E30 Zone Newbie
Posts: 116
Joined: Sun Dec 06, 2009 11:00 pm
Location: Denmark

Post Sat Jul 21, 2012 10:47 am

BMWE30325 wrote:any pics?
pics will come soon,
Brinkland

1985 Bmw e30 325e
kitch
E30 Zone Regular
E30 Zone Regular
Posts: 878
Joined: Sat Nov 01, 2008 11:00 pm

Post Sat Jul 21, 2012 3:29 pm

If you've used those springs on the standard shocks they will be doing nothing. You can get shorter stoke shocks for when a car is lowered. I'd recommend in doing a little research into which shocks ould be best for your set up.
Image
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sat Jul 21, 2012 5:16 pm

Brinkland wrote:
Andyboy wrote:
Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations. :roll:
its only when the wheels not hit the ground, the springs are loose in the cups,
Jesus Christ. :roll:

Let me give you a quick summary of suspension design. The reason springs are tight in the cups (under tension) is because that's the static spring tension. Coil springs get stronger the more you compress them - it's called 'rising rate'. The springs are under tension when the wheels are off the ground. When the car is lowered, the springs are under even more tension. That is the base springing rate from which the springs operate - it's called 'suspension'. When the springs are loose in the cups with the car off the ground, there is no static spring tension. That means what little springing you have left is as soft as sh*t and of no use, The springs are doing nothing. The car is on the bump stops.
If you've any sense, you'll chuck that FK scrap in the bin and fit some proper springs such as 30mm Eibach. However, 35mm probably isn't 'stance' enough.
User avatar
Brinkland
E30 Zone Newbie
E30 Zone Newbie
Posts: 116
Joined: Sun Dec 06, 2009 11:00 pm
Location: Denmark

Post Sun Jul 22, 2012 10:30 am

Andyboy wrote:
Brinkland wrote:
Andyboy wrote: That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations. :roll:
its only when the wheels not hit the ground, the springs are loose in the cups,
Jesus Christ. :roll:

Let me give you a quick summary of suspension design. The reason springs are tight in the cups (under tension) is because that's the static spring tension. Coil springs get stronger the more you compress them - it's called 'rising rate'. The springs are under tension when the wheels are off the ground. When the car is lowered, the springs are under even more tension. That is the base springing rate from which the springs operate - it's called 'suspension'. When the springs are loose in the cups with the car off the ground, there is no static spring tension. That means what little springing you have left is as soft as sh*t and of no use, The springs are doing nothing. The car is on the bump stops.
If you've any sense, you'll chuck that FK scrap in the bin and fit some proper springs such as 30mm Eibach. However, 35mm probably isn't 'stance' enough.
Okay thank you very much for the information .. well, then I have to switch them to something else.
The Eibach, you know where available to buy?
Brinkland

1985 Bmw e30 325e
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Jul 22, 2012 1:19 pm

Just google it. They're not cheap, around £130 ish. The problem you have is that when you lower a car, you reduce the suspension travel - that's the distance between the top of the strut body and the underside of the top mount. It's around 80mm so the car is sat on the bump stops and the springs aren't doing anything. If you must lower it by 80mm, you'd be better off with coilovers.