Okay thanks, I had thought to remove the adjusting pieces, so that it is as low as possiblesteve_k wrote:@brinkland, I've got those rear springs with adjusters myself & while they are very good just make sure you keep the adjustable platform's clean & greased because if you don't they WILL seize up & refuse to budge.
Where can I buy loweringkits 75-80mm?
Moderator: martauto
-
Brinkland
- E30 Zone Newbie

- Posts: 116
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Denmark
Brinkland
1985 Bmw e30 325e
1985 Bmw e30 325e
-
Brinkland
- E30 Zone Newbie

- Posts: 116
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Denmark
installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
Brinkland
1985 Bmw e30 325e
1985 Bmw e30 325e
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
Springs are probably so short to make the drop that they will be loose when it's jacked up.

'88 e30 328i M52 track bint.
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
Insecure springs are nothing to worry about . When you go over a big bump, the worst that can happen is the spring becomes dislodged and digs into the tyre, you crash and die in a fireball .
A small price to pay for living on the jagged edge as a stancec0ck !
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations.Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Andyboy wrote:That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations.Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
What bump stops ?
It's a lifestyle, man
-
Sjoerd320i
- E30 Zone Addict

- Posts: 4035
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Heemskerk, Holland
Pictures 

-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
I have jom cheap on front and custom gaz springs on rear and its low i must say ! Gaz will be the next choice on the next e30 tho
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
Who says there are never any happy endings in real life?pacerpete wrote:Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
Insecure springs are nothing to worry about . When you go over a big bump, the worst that can happen is the spring becomes dislodged and digs into the tyre, you crash and die in a fireball .
A small price to pay for living on the jagged edge as a stancec0ck !
-
Brinkland
- E30 Zone Newbie

- Posts: 116
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Denmark
its only when the wheels not hit the ground, the springs are loose in the cups,Andyboy wrote:That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations.Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
Brinkland
1985 Bmw e30 325e
1985 Bmw e30 325e
-
Brinkland
- E30 Zone Newbie

- Posts: 116
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Denmark
but you can only get one length short shock absorbers? or you can get several different lengths short shock absorbers?
Brinkland
1985 Bmw e30 325e
1985 Bmw e30 325e
-
BMWE30325
- E30 Zone Camper

- Posts: 1113
- Joined: Sat Jul 24, 2010 11:00 pm
- Location: South East London
any pics?
-
billcarr182
- E30 Zone Newbie

- Posts: 121
- Joined: Mon Apr 06, 2009 11:00 pm
Here it would appear that the bonnet bra has failed to prevent stone chips...rh306 wrote:
-
Brinkland
- E30 Zone Newbie

- Posts: 116
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Denmark
pics will come soon,BMWE30325 wrote:any pics?
Brinkland
1985 Bmw e30 325e
1985 Bmw e30 325e
-
kitch
- E30 Zone Regular

- Posts: 878
- Joined: Sat Nov 01, 2008 11:00 pm
If you've used those springs on the standard shocks they will be doing nothing. You can get shorter stoke shocks for when a car is lowered. I'd recommend in doing a little research into which shocks ould be best for your set up.

-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Jesus Christ.Brinkland wrote:its only when the wheels not hit the ground, the springs are loose in the cups,Andyboy wrote:That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations.Brinkland wrote:installed it yesterday, in front of the 75mm springs and original upper spring plate from a BMW E92 as it is further lowered 10mm front, so the springs are loose in the cups? when the wheels do not hit the ground, it should they not be able to?
Let me give you a quick summary of suspension design. The reason springs are tight in the cups (under tension) is because that's the static spring tension. Coil springs get stronger the more you compress them - it's called 'rising rate'. The springs are under tension when the wheels are off the ground. When the car is lowered, the springs are under even more tension. That is the base springing rate from which the springs operate - it's called 'suspension'. When the springs are loose in the cups with the car off the ground, there is no static spring tension. That means what little springing you have left is as soft as sh*t and of no use, The springs are doing nothing. The car is on the bump stops.
If you've any sense, you'll chuck that FK scrap in the bin and fit some proper springs such as 30mm Eibach. However, 35mm probably isn't 'stance' enough.
-
Brinkland
- E30 Zone Newbie

- Posts: 116
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Denmark
Okay thank you very much for the information .. well, then I have to switch them to something else.Andyboy wrote:Jesus Christ.Brinkland wrote:its only when the wheels not hit the ground, the springs are loose in the cups,Andyboy wrote: That means you have no suspension. All that you have is the tyre sidewalls and the bump stops. Congratulations.![]()
Let me give you a quick summary of suspension design. The reason springs are tight in the cups (under tension) is because that's the static spring tension. Coil springs get stronger the more you compress them - it's called 'rising rate'. The springs are under tension when the wheels are off the ground. When the car is lowered, the springs are under even more tension. That is the base springing rate from which the springs operate - it's called 'suspension'. When the springs are loose in the cups with the car off the ground, there is no static spring tension. That means what little springing you have left is as soft as sh*t and of no use, The springs are doing nothing. The car is on the bump stops.
If you've any sense, you'll chuck that FK scrap in the bin and fit some proper springs such as 30mm Eibach. However, 35mm probably isn't 'stance' enough.
The Eibach, you know where available to buy?
Brinkland
1985 Bmw e30 325e
1985 Bmw e30 325e
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Just google it. They're not cheap, around £130 ish. The problem you have is that when you lower a car, you reduce the suspension travel - that's the distance between the top of the strut body and the underside of the top mount. It's around 80mm so the car is sat on the bump stops and the springs aren't doing anything. If you must lower it by 80mm, you'd be better off with coilovers.

