Goosie's S50 Moredoor, 'Ring action

Post Sun Jul 01, 2012 1:43 pm

Looking forward to seeing this at Santa Pod

Post Sun Jul 01, 2012 5:17 pm

Looking good Goosie.

I never thought you would swap out the 2.8. Was it a drive in drive out conversion??

What's the plans for the stroker?

There something about the S50 in an E30 that is so right. I'm going to have to get saving

Post Sun Jul 01, 2012 5:25 pm

Shouldn't think this will hang around too long....

http://www.e30zone.net/modules.php?name ... c&t=222999

Post Sun Jul 01, 2012 5:31 pm

Thanks Dan,

Hi Scott, the 2.8 is going to sit in a corner of the garage and get cleaned up a bit, replace some gaskets and pipes, long term i'm not sure...

Post Sun Jul 01, 2012 8:55 pm

Oh and Yes Drive in drive out

Post Sun Jul 01, 2012 10:25 pm

You naughty man, i bet thats ace.

Post Sun Jul 01, 2012 10:38 pm

spook wrote:Get some carpet down on that garage floor,chalfonts are not nice.

Carpet holds moisture I thought.

Post Mon Jul 02, 2012 11:27 pm

wow thats very very nice mate

Post Sun Jul 08, 2012 8:45 pm

Thanks,

Got on some further bay action:

Fabric/certoplast tape to rewrap the exposed sections of the loom,

Cleanse and wax paint, reposition MAF cable tie...

Slow but steady progress...

Post Tue Jul 10, 2012 2:25 pm

Gimp.

Post Tue Jul 10, 2012 7:11 pm

tempting to do this!!!

Post Tue Jul 10, 2012 10:22 pm

goosiegander wrote: reposition MAF cable tie...

Post Tue Jul 10, 2012 10:25 pm

i hope it's a genuine mtech cable tie

Post Tue Jul 10, 2012 11:00 pm

penton08 wrote:
goosiegander wrote: reposition MAF cable tie...

LOL

Post Tue Jul 10, 2012 11:08 pm

How about fit a proper airbox, rather than faff about with cable ties

Post Wed Jul 11, 2012 6:23 pm

DanThe wrote:How about fit a proper airbox, rather than faff about with cable ties

Nah mate, cable ties is well motorsport innit yeah?

Seriously though, its just a stop-gap to hold the ITG away from the rad, if serious thought was being given to it a fabricated bracket mounted to the unused earth on the chassis rail would have worked slightly less offensively...

Dan & Rav -why don't you trek down for the BBQ on Saturday?

Be good to see you both there

Post Wed Jul 11, 2012 6:49 pm

if ever you wanted to sell them wheels please keep me in mind. i have a perfect home for them

Post Wed Jul 11, 2012 6:51 pm

Im already promised to the kumho at Oulton on Saturday mate, wouldnt mind a drive down, weather doesnt give much encouragement either though. Hopefully you will have one organised for when summer gets here

Post Wed Jul 11, 2012 7:47 pm

goosiegander wrote:
Dan & Rav -why don't you trek down for the BBQ on Saturday?

Be good to see you both there

Goosie, no can do, both cars are off the road atm.
Maybe when the chromie is up and running i'll make another effort for the 3 hr drive

Post Tue Jul 24, 2012 6:58 pm

A weekend of buftyness has just gone by...

Resulting in this...

Dan was working hard... bless

Well worthwhile though

Much fun

Post Tue Jul 24, 2012 7:00 pm

Looking Good!

Post Tue Jul 24, 2012 7:01 pm

Proper job, now the hard part, keeping it clean...

Post Tue Jul 24, 2012 8:54 pm

Doesn't that look sexy!

Post Tue Jul 24, 2012 8:59 pm

Looks awesome after the machine polisher! Something i've been thinking of buying this weekend infact...

Post Tue Jul 24, 2012 10:10 pm

Cook318IS wrote:Looks awesome after the machine polisher! Something i've been thinking of buying this weekend infact...

Have a gander on http://www.cleanyourcar.co.uk/polishing ... at_68.html

Post Tue Jul 24, 2012 10:13 pm

Very nice

Post Tue Jul 24, 2012 10:29 pm

Dan320is wrote:
Cook318IS wrote:Looks awesome after the machine polisher! Something i've been thinking of buying this weekend infact...
Have a gander on http://www.cleanyourcar.co.uk/polishing ... at_68.html

Aye! Already looked at the Das6 pro with some pads + mezerna from them. Ive already got mezerna cutting compound and a whole host of zaino already mind.

Post Fri Jul 27, 2012 4:00 pm

Cheers guys,

I'm after doing some training in August with 'the polishing company' i've gotten far more bufty as time has passed and there are a heep of cars that i can practice on for free after the initial training.

The car has always been looked after in terms of protective coatings and maintenance cleaning but its not possible to totally correct some of the deeper scratches and marring. Ideally at some point after the M3 is complete i can look at a bare metal respray of the exterior surfaces with glass out and running gear/pannels off.

Dan's choice of preparation and products have given a lovely finish, i'm especially happy with the boot and spoiler as shown in the above reflection shots...

Still makes me smile every time i open the door to the garage

Post Mon Jul 30, 2012 10:36 pm

Looking great Goosie, such a deep shine. Have you used any of the panels I gave you?

Post Mon Jul 30, 2012 10:51 pm

Looks like Dan did all the work

Post Mon Jul 30, 2012 10:55 pm

Looks like Dan did all the work

Post Wed Aug 01, 2012 8:44 pm

Rav335uk wrote:Looks like Dan did all the work

Now now young man, i'll have you know that fetching biscuits, pouring and serving drinks in addition to 'entertaining' Dan over a weekend was a proper task!

Post Wed Aug 01, 2012 8:47 pm

bmwe30mtech wrote:Looking great Goosie, such a deep shine. Have you used any of the panels I gave you?

Hi Paul,

Drivers wing for the time being, sunroof should correct quite well also,

Has the sport gone yet?

Post Wed Aug 01, 2012 9:42 pm

Much epicness

Post Thu Aug 02, 2012 7:23 pm

spook wrote:Much epicness

Thanks Chris!

Hope the 6 isn't giving you too much trouble!