BMW 325i sport 190k mileage.
Moderator: martauto
-
ETERNITY
- E30 Zone Camper

- Posts: 1402
- Joined: Thu Apr 23, 2009 11:00 pm
What should I look out for engine wise and what should or needs to be done with this sort of mileage on m20 engine.
325i sport tech 2, lach silver, 1989, BBS RS 16 split rims,
[URL=http://s878.photobucket.com/user/ETERNI ... 0.jpg.html][img]http://i878.photobucket.com/albums/ab35 ... 46cc30.jpg[/img
[URL=http://s878.photobucket.com/user/ETERNI ... 0.jpg.html][img]http://i878.photobucket.com/albums/ab35 ... 46cc30.jpg[/img
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Top end rebuild I would imagine.!
-
ETERNITY
- E30 Zone Camper

- Posts: 1402
- Joined: Thu Apr 23, 2009 11:00 pm
its got fsh
325i sport tech 2, lach silver, 1989, BBS RS 16 split rims,
[URL=http://s878.photobucket.com/user/ETERNI ... 0.jpg.html][img]http://i878.photobucket.com/albums/ab35 ... 46cc30.jpg[/img
[URL=http://s878.photobucket.com/user/ETERNI ... 0.jpg.html][img]http://i878.photobucket.com/albums/ab35 ... 46cc30.jpg[/img
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If it's been looked after at all, there shouldn't be a lot wrong with it at a mere 190k, but if the head's coming off for any reason, exhaust valve guides probably ought to be replaced, the valves faced up, and their seats lightly recut.
-
ETERNITY
- E30 Zone Camper

- Posts: 1402
- Joined: Thu Apr 23, 2009 11:00 pm
"mere 190k"
now that Brian has confirmed this. I Take its ITS ALL GOOD.
thanks again Brian
now that Brian has confirmed this. I Take its ITS ALL GOOD.
thanks again Brian
325i sport tech 2, lach silver, 1989, BBS RS 16 split rims,
[URL=http://s878.photobucket.com/user/ETERNI ... 0.jpg.html][img]http://i878.photobucket.com/albums/ab35 ... 46cc30.jpg[/img
[URL=http://s878.photobucket.com/user/ETERNI ... 0.jpg.html][img]http://i878.photobucket.com/albums/ab35 ... 46cc30.jpg[/img
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Same thing for all engines; full service of oil change, coolant, filters and spark plugs, and check condition of distributor cap and rotor. Confirm in the fsh that the cambelt has been done.
Then pay attention for leaks from the sump gasket at the back, as well as the condition of the rubber pipework around the intake system for air leaks. If all that checks out, have the injectors removed and sent off to Injectortune for cleaning, and take off the rocker cover and clean the oil spray bar with petrol.
Then pay attention for leaks from the sump gasket at the back, as well as the condition of the rubber pipework around the intake system for air leaks. If all that checks out, have the injectors removed and sent off to Injectortune for cleaning, and take off the rocker cover and clean the oil spray bar with petrol.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
