z3 shifter?
Moderator: martauto
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
I remember seeing a short shift kit thread and people talking about using the standard z3 one iirc instead. Would this be easier to do, does it shorten the throw much and will it stiffen my box a bit ( currently feels like stirring soup )[/quote][/u]
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Verde, sounds like you need to replace all the linkage bushes.
After 100K Plus and 20 plus years, they are worn out if original. It's the same theory for any rubber/moving/mechanical parts on the car, most E30's are tired turds now.
You want the Z3 1.9 shifter btw
After 100K Plus and 20 plus years, they are worn out if original. It's the same theory for any rubber/moving/mechanical parts on the car, most E30's are tired turds now.
You want the Z3 1.9 shifter btw
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Thanks lads. Those involved with the wiki deserve a knighthood. Will eurocar parts have all the linkages, mine are so bad I reckon a drift or a hard corner might make it hop outta gear
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
BMW Only for the linkage parts, check realoemverde wrote:Thanks lads. Those involved with the wiki deserve a knighthood. Will eurocar parts have all the linkages, mine are so bad I reckon a drift or a hard corner might make it hop outta gear
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
I just did all of this; shifter and all linkage bushes. It's gearbox specific, not engine specific. Total cost came to about 200 quid, and it's all BMW only.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
HOW MUCH!?!?!Grrrmachine wrote:I just did all of this; shifter and all linkage bushes. It's gearbox specific, not engine specific. Total cost came to about 200 quid, and it's all BMW only.
You used to be able to get the Z3 lever and all bushes for about £35 a few years ago, i know BMW have since upped the level price a fair bit to cash in on the demand for it.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
what the fuuuuck. i cant afford that shit.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
That's an eyebrow raising increase!Grrrmachine wrote:I just did all of this; shifter and all linkage bushes. It's gearbox specific, not engine specific. Total cost came to about 200 quid, and it's all BMW only.
Last one I did was about two years back and the parts cost was well under £100,£60/£70 seems to ring bells.
The cost of the Z3 1.9 shift lever has risen,I expect that all us E30 types are to blame as the stock held at Munich will have run out and a fresh batch will have had to be made....
Well worth the cost and effort involved,be worth checking with Cotswold BMW for their 'best price' for the parts.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Sorry, got my exchange rates muddled (ordered from Lithuania, paid from Poland, converting to pounds...). My total cost was 125 quid. Still a hell of a lot more than the 35 quid of a few years back. Most of the cost comes down to three bits:
Actual Z3 shifter: 42 quid
Shift Arm Bearing (holds the shifter to the car body): 28 quid
Gearshift rod joint (holds the shifter to the gearbox): 35 quid
Then a dozen little clips, rings and pegs.
Actual Z3 shifter: 42 quid
Shift Arm Bearing (holds the shifter to the car body): 28 quid
Gearshift rod joint (holds the shifter to the gearbox): 35 quid
Then a dozen little clips, rings and pegs.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Il see about taking this z3 kit off andyp and then il sorta out a drift style jdm dildoish knob and itl be sorted. be less like a bowl of soup and more like a gearbox
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
I didn't change the bushes on the arms so that adds to the price difference.Grrrmachine wrote:Actual Z3 shifter: 42 quid
Shift Arm Bearing (holds the shifter to the car body): 28 quid
Gearshift rod joint (holds the shifter to the gearbox): 35 quid
Then a dozen little clips, rings and pegs.
All that's going to do is replace the BMW level, most of the bushes and linkage will no doubt be retained and so they'll still need replacing!ross_jsy wrote:£125? Ouch!
I'll be going for the AKG unit:
http://www.akgmotorsport.com/catalog/vi ... S230lg.jpg
If you're ONLY changing the levers like for like the Z3 is probably still the cheapest but since the bushes are all 20+ years old you want to be replacing those while you're in there.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
You need to replace the bushes to sort this problem, a shorter lever is going to highlight worn bushes and make gear changes worse without changing them.verde wrote:be less like a bowl of soup and more like a gearbox
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Definately but i think andy said all those parts were included...if not il buy new ones. Il make sure I do them all at the same time.Kedge wrote:You need to replace the bushes to sort this problem, a shorter lever is going to highlight worn bushes and make gear changes worse without changing them.verde wrote:be less like a bowl of soup and more like a gearbox
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Also, the Wiki does need updating; there shouldn't be any need to bend the shifter rod since few cars should be running with the vibration damper on the prop these days. And RealOEM is rather confusing:
http://www.realoem.com/bmw/showparts.do ... g=25&fg=05
Part 13 has changed, so you DON'T need parts 18 or 19. Which will save you about one pound fifty
http://www.realoem.com/bmw/showparts.do ... g=25&fg=05
Part 13 has changed, so you DON'T need parts 18 or 19. Which will save you about one pound fifty
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
I don't plan on using bushesKedge wrote:All that's going to do is replace the BMW level, most of the bushes and linkage will no doubt be retained and so they'll still need replacing!
If you're ONLY changing the levers like for like the Z3 is probably still the cheapest but since the bushes are all 20+ years old you want to be replacing those while you're in there.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
[quote="
Part 13 has changed, so you DON'T need parts 18 or 19. Which will save you about one pound fifty
[/quote]
I think il buy me a house in the sun!
Part 13 has changed, so you DON'T need parts 18 or 19. Which will save you about one pound fifty
I think il buy me a house in the sun!
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift

