z3 shifter?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed Jul 04, 2012 10:19 am

I remember seeing a short shift kit thread and people talking about using the standard z3 one iirc instead. Would this be easier to do, does it shorten the throw much and will it stiffen my box a bit ( currently feels like stirring soup )[/quote][/u]
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed Jul 04, 2012 10:56 am

Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Wed Jul 04, 2012 11:11 am

Verde, sounds like you need to replace all the linkage bushes.

After 100K Plus and 20 plus years, they are worn out if original. It's the same theory for any rubber/moving/mechanical parts on the car, most E30's are tired turds now.

You want the Z3 1.9 shifter btw
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed Jul 04, 2012 11:20 am

Thanks lads. Those involved with the wiki deserve a knighthood. Will eurocar parts have all the linkages, mine are so bad I reckon a drift or a hard corner might make it hop outta gear
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Wed Jul 04, 2012 11:31 am

verde wrote:Thanks lads. Those involved with the wiki deserve a knighthood. Will eurocar parts have all the linkages, mine are so bad I reckon a drift or a hard corner might make it hop outta gear
BMW Only for the linkage parts, check realoem
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Wed Jul 04, 2012 11:59 am

I just did all of this; shifter and all linkage bushes. It's gearbox specific, not engine specific. Total cost came to about 200 quid, and it's all BMW only.
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed Jul 04, 2012 12:02 pm

Grrrmachine wrote:I just did all of this; shifter and all linkage bushes. It's gearbox specific, not engine specific. Total cost came to about 200 quid, and it's all BMW only.
HOW MUCH!?!?! :eek:

You used to be able to get the Z3 lever and all bushes for about £35 a few years ago, i know BMW have since upped the level price a fair bit to cash in on the demand for it.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed Jul 04, 2012 12:10 pm

what the fuuuuck. i cant afford that shit.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Jul 04, 2012 12:19 pm

Grrrmachine wrote:I just did all of this; shifter and all linkage bushes. It's gearbox specific, not engine specific. Total cost came to about 200 quid, and it's all BMW only.
That's an eyebrow raising increase!

Last one I did was about two years back and the parts cost was well under £100,£60/£70 seems to ring bells.

The cost of the Z3 1.9 shift lever has risen,I expect that all us E30 types are to blame as the stock held at Munich will have run out and a fresh batch will have had to be made....

Well worth the cost and effort involved,be worth checking with Cotswold BMW for their 'best price' for the parts.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Wed Jul 04, 2012 12:32 pm

Sorry, got my exchange rates muddled (ordered from Lithuania, paid from Poland, converting to pounds...). My total cost was 125 quid. Still a hell of a lot more than the 35 quid of a few years back. Most of the cost comes down to three bits:

Actual Z3 shifter: 42 quid
Shift Arm Bearing (holds the shifter to the car body): 28 quid
Gearshift rod joint (holds the shifter to the gearbox): 35 quid

Then a dozen little clips, rings and pegs.
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Wed Jul 04, 2012 12:45 pm

£125? Ouch!

I'll be going for the AKG unit:

http://www.akgmotorsport.com/catalog/vi ... S230lg.jpg

8)
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed Jul 04, 2012 12:47 pm

:cool:
Il see about taking this z3 kit off andyp and then il sorta out a drift style jdm dildoish knob and itl be sorted. be less like a bowl of soup and more like a gearbox
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed Jul 04, 2012 12:51 pm

Grrrmachine wrote:Actual Z3 shifter: 42 quid
Shift Arm Bearing (holds the shifter to the car body): 28 quid
Gearshift rod joint (holds the shifter to the gearbox): 35 quid

Then a dozen little clips, rings and pegs.
I didn't change the bushes on the arms so that adds to the price difference.
ross_jsy wrote:£125? Ouch!

I'll be going for the AKG unit:

http://www.akgmotorsport.com/catalog/vi ... S230lg.jpg

8)
All that's going to do is replace the BMW level, most of the bushes and linkage will no doubt be retained and so they'll still need replacing!

If you're ONLY changing the levers like for like the Z3 is probably still the cheapest but since the bushes are all 20+ years old you want to be replacing those while you're in there.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Wed Jul 04, 2012 12:52 pm

verde wrote:be less like a bowl of soup and more like a gearbox
You need to replace the bushes to sort this problem, a shorter lever is going to highlight worn bushes and make gear changes worse without changing them.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed Jul 04, 2012 1:01 pm

Kedge wrote:
verde wrote:be less like a bowl of soup and more like a gearbox
You need to replace the bushes to sort this problem, a shorter lever is going to highlight worn bushes and make gear changes worse without changing them.
Definately but i think andy said all those parts were included...if not il buy new ones. Il make sure I do them all at the same time.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Wed Jul 04, 2012 1:01 pm

Also, the Wiki does need updating; there shouldn't be any need to bend the shifter rod since few cars should be running with the vibration damper on the prop these days. And RealOEM is rather confusing:

http://www.realoem.com/bmw/showparts.do ... g=25&fg=05

Part 13 has changed, so you DON'T need parts 18 or 19. Which will save you about one pound fifty :mad:
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Wed Jul 04, 2012 1:06 pm

Kedge wrote:All that's going to do is replace the BMW level, most of the bushes and linkage will no doubt be retained and so they'll still need replacing!

If you're ONLY changing the levers like for like the Z3 is probably still the cheapest but since the bushes are all 20+ years old you want to be replacing those while you're in there.
I don't plan on using bushes :wink:
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed Jul 04, 2012 1:08 pm

[quote="

Part 13 has changed, so you DON'T need parts 18 or 19. Which will save you about one pound fifty :mad:[/quote]

I think il buy me a house in the sun!
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift