bloody wishbone bushes

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
e30mtech
E30 Zone Regular
E30 Zone Regular
Posts: 430
Joined: Wed Dec 05, 2007 11:00 pm
Location: glenrothes, fife

Post Sun Jul 01, 2012 8:43 pm

recently bought wishbone bushes and drop links for ma e30, removed old ones (which was a nightmare) now i'm really struggling to get the wishbone bushes back on, the centre hole just seems so much smaller than the end of the wishbone and just wont bloody go on, its gettin on me tights,

checked the wiki but not really helping

any other ideas?

could i drill a small amount of the bush inside or sand down the end of wishbone? i know its meant to be tight but jesus it surely cant be this bad.
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sun Jul 01, 2012 8:55 pm

i used copper slip and pushed them on,it's a struggle and on the second one i stopped for a breather half way through and watched it slide back up on it's own and pop off the end :cry:
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
irish320i
E30 Zone Regular
E30 Zone Regular
Posts: 431
Joined: Wed Jun 29, 2005 11:00 pm
Location: Co. Monaghan, Ireland

Post Sun Jul 01, 2012 10:37 pm

washing up liquid is best no grease should be used as it causes the bush to wear prematurely by allowing it to move around inside the bush, washing up liquid just drys out.
Al
89 316i s50b30, 00 subaru imperza turbo(gone) 2005 range rover td6,
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Jul 01, 2012 10:44 pm

magpie wrote:i used copper slip and pushed them on,it's a struggle and on the second one i stopped for a breather half way through and watched it slide back up on it's own and pop off the end :cry:
These will probably be still turning on the pins, and effectively scrap.
To the OP: Did you polish up the pin before you tried to push the bush on? They don't exactly slip on, but it should be easily achievable by hand.
spook
League two here we come !!!
Posts: 7583
Joined: Sat Aug 19, 2006 11:00 pm
Location: portsmouth

Post Sun Jul 01, 2012 10:47 pm

The strong arm of the Moore^ :D

Sorry Brian. :D
Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sun Jul 01, 2012 10:48 pm

I used a scissor jack and the door frame from my garage to utility :D
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sun Jul 01, 2012 10:53 pm

Brianmoooore wrote:
magpie wrote:i used copper slip and pushed them on,it's a struggle and on the second one i stopped for a breather half way through and watched it slide back up on it's own and pop off the end :cry:
These will probably be still turning on the pins, and effectively scrap.
i had a control arm off the other day and i did check the bush, its solid ie no movement.the fitting of these is that tight it pushed any copper slip out so i think i'll be fine .

edit...they've been in over a year now btw.

:D
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
e30mtech
E30 Zone Regular
E30 Zone Regular
Posts: 430
Joined: Wed Dec 05, 2007 11:00 pm
Location: glenrothes, fife

Post Sun Jul 01, 2012 11:34 pm

fairy was my next bet,

yeah i tidied up the pin
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sun Jul 01, 2012 11:39 pm

They are a bitch to slide on by hand, i was roaring like a wrestler on my last set.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
mcbonio
E30 Zone Squatter
E30 Zone Squatter
Posts: 1868
Joined: Sun Feb 12, 2012 11:00 pm

Post Sun Jul 01, 2012 11:39 pm

Me and my brother with both of our strength together pushed em on, with a bit of fairy liquid.