Removing cracked paint from M tech valance

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Idol
E30 Zone Regular
E30 Zone Regular
Posts: 331
Joined: Mon Jul 31, 2006 11:00 pm
Location: Essex

Post Thu Jun 21, 2012 1:24 pm

Hows the best way to go about this? Mine has thick paint on it that has cracked.
Whats the best way of removing the paint before a re-paint? I dont really want to spend hours sanding.

Is there any chemical strippers out there that wouldn't harm the plastic?
Hot air gun?
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Thu Jun 21, 2012 4:12 pm

Had the same problem, on mine i found it was thick enough to get a razor blade and get under the edge, it could then be peeled like vinyl.

I was very reluctant to put another coat over the 5+ that were already in it and also did not want to risk chemical strippers.
I think anything strong enough to get the 2k off will also hurt the plastic and a heat gun will probably end up warping it.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
mcbonio
E30 Zone Squatter
E30 Zone Squatter
Posts: 1868
Joined: Sun Feb 12, 2012 11:00 pm

Post Thu Jun 21, 2012 5:05 pm

I'm sure nitromours would be fine to use.!
Idol
E30 Zone Regular
E30 Zone Regular
Posts: 331
Joined: Mon Jul 31, 2006 11:00 pm
Location: Essex

Post Thu Jun 21, 2012 5:37 pm

HairyScreech wrote:Had the same problem, on mine i found it was thick enough to get a razor blade and get under the edge, it could then be peeled like vinyl.

I was very reluctant to put another coat over the 5+ that were already in it and also did not want to risk chemical strippers.
I think anything strong enough to get the 2k off will also hurt the plastic and a heat gun will probably end up warping it.
Yeah mine has loads of coats on it. I'll give the razor blade idea ago cheers.
Idol
E30 Zone Regular
E30 Zone Regular
Posts: 331
Joined: Mon Jul 31, 2006 11:00 pm
Location: Essex

Post Thu Jun 21, 2012 5:38 pm

mcbonio wrote:I'm sure nitromours would be fine to use.!
Im pretty sure it will melt the plastic, but saying that, I have got an old cracked valance that i could test on ....
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Thu Jun 21, 2012 6:03 pm

a friend of mine was using nitromors to strip paint from her bathroom tiles and it starting falling off and into the bath. it was plastic and left marks like you get from bird droppings on paintwork
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
pac1982
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5330
Joined: Fri Mar 07, 2008 11:00 pm
Location: isle of wight

Post Thu Jun 21, 2012 6:05 pm

good old paint stripper, does exactly what is says on the tin, its not gonna melt through several mm of plastic bumper
Image

1991 BMW E30 318i Neon Design Convertible (Sold)
1990 BMW E30 325i Touring (Sold)
1990 BMW E30 318IS (Sold)
1990 BMW E30 316i (RIP)
User avatar
aimlessrock
E30 Zone Squatter
E30 Zone Squatter
Posts: 1821
Joined: Sun Dec 06, 2009 11:00 pm
Location: Manchester

Post Thu Jun 21, 2012 6:17 pm

nitromors is the one to use, but use it sparingly. I have used i for stripping part that have been painted (usually badly by former owners)

avoid getting it on your skin...it burns!
E30 320i Convertible (1989)
190 Mercedes (1988)

"there is nothing more expensive than a cheap E30"
mcbonio
E30 Zone Squatter
E30 Zone Squatter
Posts: 1868
Joined: Sun Feb 12, 2012 11:00 pm

Post Thu Jun 21, 2012 6:30 pm

Get the Nitromors automotive stuff, works good on 2k paint..!


Image
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Thu Jun 21, 2012 7:17 pm

problem is with stipper it sinks into plastic wont harm the ABS plastic but it will harm the paint once you paint it cos the stipper is still in the plastic
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Thu Jun 21, 2012 7:31 pm

Soda blasting? There are mobile soda blasters out there and it seems that it is the best way of stripping paint etc. Not cheap but it is effective, safe, and environmentally friendly.
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Thu Jun 21, 2012 9:47 pm

Gavla wrote:Soda blasting? There are mobile soda blasters out there and it seems that it is the best way of stripping paint etc. Not cheap but it is effective, safe, and environmentally friendly.
This, I have used my soda blaster to strip an mtech 1 spoiler with good effect.

Paint stripper is not the stuff to use on plastic parts.
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sat Jun 23, 2012 1:20 pm

surely a machine sander wont take long ? and also give a nice smooth finish with regard to re priming and painting, whos re painting it ? maybe just give it to them to do the full job
User avatar
toby
E30 Zone Addict
E30 Zone Addict
Posts: 3609
Joined: Thu Aug 11, 2005 11:00 pm
Location: Kent

Post Sat Jun 23, 2012 3:40 pm

Jet wash?
Image