Removing cracked paint from M tech valance
Moderator: martauto
-
Idol
- E30 Zone Regular

- Posts: 331
- Joined: Mon Jul 31, 2006 11:00 pm
- Location: Essex
Hows the best way to go about this? Mine has thick paint on it that has cracked.
Whats the best way of removing the paint before a re-paint? I dont really want to spend hours sanding.
Is there any chemical strippers out there that wouldn't harm the plastic?
Hot air gun?
Whats the best way of removing the paint before a re-paint? I dont really want to spend hours sanding.
Is there any chemical strippers out there that wouldn't harm the plastic?
Hot air gun?
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Had the same problem, on mine i found it was thick enough to get a razor blade and get under the edge, it could then be peeled like vinyl.
I was very reluctant to put another coat over the 5+ that were already in it and also did not want to risk chemical strippers.
I think anything strong enough to get the 2k off will also hurt the plastic and a heat gun will probably end up warping it.
I was very reluctant to put another coat over the 5+ that were already in it and also did not want to risk chemical strippers.
I think anything strong enough to get the 2k off will also hurt the plastic and a heat gun will probably end up warping it.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
I'm sure nitromours would be fine to use.!
-
Idol
- E30 Zone Regular

- Posts: 331
- Joined: Mon Jul 31, 2006 11:00 pm
- Location: Essex
Yeah mine has loads of coats on it. I'll give the razor blade idea ago cheers.HairyScreech wrote:Had the same problem, on mine i found it was thick enough to get a razor blade and get under the edge, it could then be peeled like vinyl.
I was very reluctant to put another coat over the 5+ that were already in it and also did not want to risk chemical strippers.
I think anything strong enough to get the 2k off will also hurt the plastic and a heat gun will probably end up warping it.
-
Idol
- E30 Zone Regular

- Posts: 331
- Joined: Mon Jul 31, 2006 11:00 pm
- Location: Essex
Im pretty sure it will melt the plastic, but saying that, I have got an old cracked valance that i could test on ....mcbonio wrote:I'm sure nitromours would be fine to use.!
-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
a friend of mine was using nitromors to strip paint from her bathroom tiles and it starting falling off and into the bath. it was plastic and left marks like you get from bird droppings on paintwork

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
pac1982
- Engaged to the E30 Zone

- Posts: 5330
- Joined: Fri Mar 07, 2008 11:00 pm
- Location: isle of wight
good old paint stripper, does exactly what is says on the tin, its not gonna melt through several mm of plastic bumper

1991 BMW E30 318i Neon Design Convertible (Sold)
1990 BMW E30 325i Touring (Sold)
1990 BMW E30 318IS (Sold)
1990 BMW E30 316i (RIP)
-
aimlessrock
- E30 Zone Squatter

- Posts: 1821
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Manchester
nitromors is the one to use, but use it sparingly. I have used i for stripping part that have been painted (usually badly by former owners)
avoid getting it on your skin...it burns!
avoid getting it on your skin...it burns!
E30 320i Convertible (1989)
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Get the Nitromors automotive stuff, works good on 2k paint..!


-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
problem is with stipper it sinks into plastic wont harm the ABS plastic but it will harm the paint once you paint it cos the stipper is still in the plastic
-
Gavla
- E30 Zone Squatter

- Posts: 1586
- Joined: Tue Dec 06, 2011 11:00 pm
Soda blasting? There are mobile soda blasters out there and it seems that it is the best way of stripping paint etc. Not cheap but it is effective, safe, and environmentally friendly.
-
maggspower
- Turbo Farmer Tractor Driver
- Posts: 2376
- Joined: Wed Oct 12, 2005 11:00 pm
- Location: Nowhere near South Wales, ok butt
This, I have used my soda blaster to strip an mtech 1 spoiler with good effect.Gavla wrote:Soda blasting? There are mobile soda blasters out there and it seems that it is the best way of stripping paint etc. Not cheap but it is effective, safe, and environmentally friendly.
Paint stripper is not the stuff to use on plastic parts.
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
surely a machine sander wont take long ? and also give a nice smooth finish with regard to re priming and painting, whos re painting it ? maybe just give it to them to do the full job

