cab door cards

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
lamby
E30 Zone Regular
E30 Zone Regular
Posts: 251
Joined: Wed Jan 27, 2010 11:00 pm

Post Mon Jun 18, 2012 2:37 pm

the tops of my door cards dont fit well,like they have lifted,would i be able to bend them down or will this damage them,or are cab and non cab ones different just in case they have been changed?
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Jun 18, 2012 3:58 pm

This seems to be caused by warm weather distorting the backing card.

Remove from the car and use steam on the inside of the top of the card to soften it,then carefully re-shape.I added a self tapping screw at the jamb end to help hold the card in place.

Only happened to the driver's door card on my car,which really,rules out the warm weather theory!

It's not a permenent fix,BTW,mine really needs stripping and doing again.

Saloon cards are slightly different,as they have framed doors,they need a small modification to make them fit.
Youth is wasted on the young.
Z3I
E30 Zone Addict
E30 Zone Addict
Posts: 3504
Joined: Tue Apr 25, 2006 11:00 pm
Location: By Brooklands, in the sunny south.

Post Mon Jun 18, 2012 4:11 pm

daimlerman wrote:This seems to be caused by warm weather distorting the backing card.

Remove from the car and use steam on the inside of the top of the card to soften it,then carefully re-shape.I added a self tapping screw at the jamb end to help hold the card in place.

Only happened to the driver's door card on my car,which really,rules out the warm weather theory!

It's not a permenent fix,BTW,mine really needs stripping and doing again.

Saloon cards are slightly different,as they have framed doors,they need a small modification to make them fit.
When you steam the tops of the card, on the inside, before its set paint some glue on the card of a type that will soak into the card, to help it keep shape. Needs to be a water based glue. Gently clamp it to shape whilst it dries out.
Selection of BMW hardtops available, please ask!
User avatar
lamby
E30 Zone Regular
E30 Zone Regular
Posts: 251
Joined: Wed Jan 27, 2010 11:00 pm

Post Mon Jun 18, 2012 7:02 pm

ok thanks i,ll give it a go,be like paper mache :D