I have been making good progress with the rear end rebuild of the sport but have hit a problem today.
Basically my trailing arms will not fit into the rear subframe brackets.
It would seem that not all 325 subframes are the same dimentions.
I have the originial subframe from the car all powder coated with new bushes but my trailing arms that have been fully rebuilt will not fit.
The trailing arms are from my old sport witch was on a G plate and subframe from JBU on an F plate.
I'm so fooked off as I had hoped to get this all buttoned up today but now i'm going to have to find the correct size rear subframe.
It measures out to 1cm difference between trailing arms.
The smaller trailing arm is 26cm across from the inner face of each lug and the bigger trailing arm 27cm
So I need a trailing arm with the 26cm spacing brackets.
Has anyone found this before and has anyone got a subframe that will work!


[/b]












