Rear Subframe/Trailing Arm Compatibility Problems Fixed

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Mon Jun 18, 2012 11:52 am

Has anyone ever come across this problem.

I have been making good progress with the rear end rebuild of the sport but have hit a problem today.

Basically my trailing arms will not fit into the rear subframe brackets.

It would seem that not all 325 subframes are the same dimentions.

I have the originial subframe from the car all powder coated with new bushes but my trailing arms that have been fully rebuilt will not fit.

The trailing arms are from my old sport witch was on a G plate and subframe from JBU on an F plate.

I'm so fooked off as I had hoped to get this all buttoned up today but now i'm going to have to find the correct size rear subframe. :cry: :cry: :cry: :cry:

It measures out to 1cm difference between trailing arms. 8O

The smaller trailing arm is 26cm across from the inner face of each lug and the bigger trailing arm 27cm

So I need a trailing arm with the 26cm spacing brackets. :x :x

Has anyone found this before and has anyone got a subframe that will work!

Image

Image

Image[/b]
Last edited by scott180gtb on Tue Jun 19, 2012 9:24 pm, edited 1 time in total.
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Jun 18, 2012 12:06 pm

Will the bush spacer thingy's trim down a little to obtain a fit?

Never seen this before,but it looks like a manufacturing tolerance issue,you have two components at opposite ends of tolerance,perhaps?
scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Mon Jun 18, 2012 12:13 pm

I can't see it being a tolerance issue 1 cm is is a massive gap. Surly such a wide tolerance would cause big issues with wheel spacing,tracking etc.

I use big hammers for a living and there is no way this is going to fit.

I have just offered up the old trailing arms of jbu and they drop in a dream.
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Jun 18, 2012 12:24 pm

Sorry,I assumed a typo!
Thought you meant 1mm... :o:

Agreed that 1cm is huge,have you had a wander through the parts sites looking at part numbers?

Bit of a bugger,though.I have never had the luxury of a spare set of trailing arms!
Youth is wasted on the young.
scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Mon Jun 18, 2012 12:36 pm

I could just use the original trailing arms but that would mean a load more work to strip powder coat and rebuild rather than finding a subframe that works.

I cant say how much I'm pi$££"£ off. The summer is coming and I'm miles away from having this done. One more setback and the gas axe is coming out.

:x
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Mon Jun 18, 2012 12:42 pm

Just checked on real oem and only one part number is listed for the subframe.
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
Jos
E30 Zone Camper
E30 Zone Camper
Posts: 1104
Joined: Mon Jan 17, 2005 11:00 pm
Location: Belfast

Post Mon Jun 18, 2012 12:45 pm

By the looks of things those mounts on the subframe look redone.. the welding is a full fillet on yours, the beams I have seen the are a 1cm tack at each end.
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Mon Jun 18, 2012 1:02 pm

I'm pretty certain that they are factory welds. I cant think of a reasonable reason to remove and re weld all four lugs. Even after an accident. I would assume that the subframes were all made on a jig and welded by hand.

I have just spoke to Mick. The issue might be that jbu has a pre facelift subframe setup and my first sport used the facelift subframe and possible the two are not compatible.

I'm lost :?
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Jun 18, 2012 1:13 pm

Mine has those sorts of welds too.

I've had a play around with RealOEM, and I can't find any model that uses a different rear beam, regardless of age, engine or bodystyle.
Motorhole
E30 Zone Addict
E30 Zone Addict
Posts: 2395
Joined: Tue Jul 12, 2005 11:00 pm
Location: Cheshire

Post Mon Jun 18, 2012 1:35 pm

Grrrmachine wrote:Mine has those sorts of welds too.

I've had a play around with RealOEM, and I can't find any model that uses a different rear beam, regardless of age, engine or bodystyle.
E36 Compact and Z3 subframes are all the same spacing too, to rule that out as a possibility.
staley_turbo
E30 Zone Camper
E30 Zone Camper
Posts: 1391
Joined: Tue Jan 19, 2010 11:00 pm
Location: Leicester

Post Mon Jun 18, 2012 1:40 pm

Something has got to be bent?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jun 18, 2012 2:06 pm

staley_turbo wrote:Something has got to be bent?
No changes, ever, that I know about, and I've fitted plenty of trailing arms into rear beams that they weren't originally fitted to.
The only different beam I know about is the one fitted to the M3, and that's only a different position for the exhaust bracket.
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Mon Jun 18, 2012 2:13 pm

all rear beams/arms are the same from early on to the last models summat is Bent scotty, has to be..

are the arms from the sport that you slung into a ditch ?
Jos
E30 Zone Camper
E30 Zone Camper
Posts: 1104
Joined: Mon Jan 17, 2005 11:00 pm
Location: Belfast

Post Mon Jun 18, 2012 2:18 pm

Are both arms the same? If 1 was bent it would be strange the other would be the same bend..
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Mon Jun 18, 2012 2:39 pm

Both arms are the same!!!!!!

I will make this clear.

The subframe is of JBU witch drove fine. The trailing arms are off my original sport witch drove fine. Both rear arms are the same size and they both don't fit.

They could not both be bent to the exact same dimensions????

Have a look at these pics.

The first two pics shows how far out the arms are. The last pic is of the other leg off the arm lined up.

Image
Image
Image
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
Sjoerd320i
E30 Zone Addict
E30 Zone Addict
Posts: 4035
Joined: Mon Jan 10, 2005 11:00 pm
Location: Heemskerk, Holland

Post Mon Jun 18, 2012 3:22 pm

Push the rubbers a bit more to the outside of the arms.
I had the same problem when I had fitted new rubbers to the arms.
Mine came appart from a set but didn't want to go back.
Image
scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Tue Jun 19, 2012 9:16 pm

Sjoerd320i wrote:Push the rubbers a bit more to the outside of the arms.
I had the same problem when I had fitted new rubbers to the arms.
Mine came appart from a set but didn't want to go back.
Managed to get this sorted today.

I picked up another rear subframe from Lee last night and had a good look today.

It turned out that drivers side rear trailing arm was defiantly bent.

This must have been done whilst pushing the old rubbers out and new ones in. Somehow the fork end was squeezed in a hole 10mm 8O

I was convinced that there was more than one type of subframe but accept that I should have listened to the experience that's on here. My bad :o:

Anyway I used a trusty BMW jack to open up the gap back to the correct 27cm.

I'm not totally happy with this as its a bit of a bodge in my eyes. My main concern is that the arse end geometry will be out. I will get the car tracked when I finally get this turd back on the road.

Worst case scenario is that I have to get another trailing arm powder coated and built up.

Again sorry for not being a believer.

Some pics

Image
Image
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Jun 19, 2012 9:21 pm

/\/\/\/\Porn

Nice work 8)
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Tue Jun 19, 2012 9:24 pm

capri_rob wrote:/\/\/\/\Porn

Nice work 8)
I was just thinking the same thing 8O

I've just hammerited a load of bits, looking at these pictures makes me want to burn everything i've done :cry: :mad:
User avatar
Billwill
E30 Zone Regular
E30 Zone Regular
Posts: 363
Joined: Sun Jun 26, 2011 11:00 pm
Location: South Africa

Post Wed Jun 20, 2012 12:29 pm

That looks like it has just rolled off the factory floor!

Very nice work. :D