cheeers
does a 325i automatic gearbox fit a 320i engine?
Moderator: martauto
-
hitmanimmy
- E30 Zone Newbie

- Posts: 6
- Joined: Fri Jun 08, 2012 11:00 pm
hi i'm new to e30's... iv just brought one and i think the transfer box is gone in the the 320i automatic gearboxx.... just wondering if its possible to fit another gearbox from a 323 or 325?? and would it go straight in????
cheeers
cheeers
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Either gearbox, with it's corresponding propshaft, will fit your engine, provided that the 320 engine isn't an early one with two crankshaft position sensors mounted in the bell housing.
325s use a (stronger) and longer 260 manual gearbox than the 240 fitted to the smaller six pot engines.
325s use a (stronger) and longer 260 manual gearbox than the 240 fitted to the smaller six pot engines.
-
hitmanimmy
- E30 Zone Newbie

- Posts: 6
- Joined: Fri Jun 08, 2012 11:00 pm
ermm my e30s a 1989 model..... soo i take it if i was to get a 325i automatic gearbox and propshaft it shud be alll good 
cheeers thanks 4 your help!!
cheeers thanks 4 your help!!
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Not quite so simple. Assuming your 320 gearbox is non switchable, you will need a non switchable 325 box and prop, unless you want to retrofit the the switchable loom/switch ecu etc, which is loads of extra aggro for a pointless switch.hitmanimmy wrote:ermm my e30s a 1989 model..... soo i take it if i was to get a 325i automatic gearbox and propshaft it shud be alll good
cheeers thanks 4 your help!!
I have all of these parts in stock
-
hitmanimmy
- E30 Zone Newbie

- Posts: 6
- Joined: Fri Jun 08, 2012 11:00 pm
pacerpete wrote:Not quite so simple. Assuming your 320 gearbox is non switchable, you will need a non switchable 325 box and prop, unless you want to retrofit the the switchable loom/switch ecu etc, which is loads of extra aggro for a pointless switch.hitmanimmy wrote:ermm my e30s a 1989 model..... soo i take it if i was to get a 325i automatic gearbox and propshaft it shud be alll good
cheeers thanks 4 your help!!
I have all of these parts in stock
lol oh okayyy i think iv got the non switchable gearboxx .... i take it you have the switchable gearbox parts ...
thanksss for ur help also
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Autos, not manuals! And 320i's never had the two bellhousing crank sensors unless they were the ultra rare chrome bumper cars with a catalyst.Brianmoooore wrote:Either gearbox, with it's corresponding propshaft, will fit your engine, provided that the 320 engine isn't an early one with two crankshaft position sensors mounted in the bell housing.
325s use a (stronger) and longer 260 manual gearbox than the 240 fitted to the smaller six pot engines.
A non switchable 325i autobox will swap straight over. The valve blcok is valved slightly differently but it'll work alright.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Should really read posts more carefully before replying! Just assumed he was wanting to fit a manual box.Andyboy wrote:Autos, not manuals! And 320i's never had the two bellhousing crank sensors unless they were the ultra rare chrome bumper cars with a catalyst.Brianmoooore wrote:Either gearbox, with it's corresponding propshaft, will fit your engine, provided that the 320 engine isn't an early one with two crankshaft position sensors mounted in the bell housing.
325s use a (stronger) and longer 260 manual gearbox than the 240 fitted to the smaller six pot engines.
A non switchable 325i autobox will swap straight over. The valve blcok is valved slightly differently but it'll work alright.
