does a 325i automatic gearbox fit a 320i engine?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
hitmanimmy
E30 Zone Newbie
E30 Zone Newbie
Posts: 6
Joined: Fri Jun 08, 2012 11:00 pm

Post Sun Jun 10, 2012 6:44 pm

hi i'm new to e30's... iv just brought one and i think the transfer box is gone in the the 320i automatic gearboxx.... just wondering if its possible to fit another gearbox from a 323 or 325?? and would it go straight in????

cheeers :D
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Jun 10, 2012 9:28 pm

Either gearbox, with it's corresponding propshaft, will fit your engine, provided that the 320 engine isn't an early one with two crankshaft position sensors mounted in the bell housing.
325s use a (stronger) and longer 260 manual gearbox than the 240 fitted to the smaller six pot engines.
User avatar
hitmanimmy
E30 Zone Newbie
E30 Zone Newbie
Posts: 6
Joined: Fri Jun 08, 2012 11:00 pm

Post Mon Jun 11, 2012 11:37 am

ermm my e30s a 1989 model..... soo i take it if i was to get a 325i automatic gearbox and propshaft it shud be alll good :)

cheeers thanks 4 your help!!
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Mon Jun 11, 2012 12:03 pm

hitmanimmy wrote:ermm my e30s a 1989 model..... soo i take it if i was to get a 325i automatic gearbox and propshaft it shud be alll good :)

cheeers thanks 4 your help!!
Not quite so simple. Assuming your 320 gearbox is non switchable, you will need a non switchable 325 box and prop, unless you want to retrofit the the switchable loom/switch ecu etc, which is loads of extra aggro for a pointless switch.

I have all of these parts in stock :)
User avatar
hitmanimmy
E30 Zone Newbie
E30 Zone Newbie
Posts: 6
Joined: Fri Jun 08, 2012 11:00 pm

Post Mon Jun 11, 2012 12:49 pm

pacerpete wrote:
hitmanimmy wrote:ermm my e30s a 1989 model..... soo i take it if i was to get a 325i automatic gearbox and propshaft it shud be alll good :)

cheeers thanks 4 your help!!
Not quite so simple. Assuming your 320 gearbox is non switchable, you will need a non switchable 325 box and prop, unless you want to retrofit the the switchable loom/switch ecu etc, which is loads of extra aggro for a pointless switch.

I have all of these parts in stock :)

lol oh okayyy i think iv got the non switchable gearboxx .... i take it you have the switchable gearbox parts ... :(

thanksss for ur help also :)
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Mon Jun 11, 2012 6:24 pm

Brianmoooore wrote:Either gearbox, with it's corresponding propshaft, will fit your engine, provided that the 320 engine isn't an early one with two crankshaft position sensors mounted in the bell housing.
325s use a (stronger) and longer 260 manual gearbox than the 240 fitted to the smaller six pot engines.
Autos, not manuals! And 320i's never had the two bellhousing crank sensors unless they were the ultra rare chrome bumper cars with a catalyst.

A non switchable 325i autobox will swap straight over. The valve blcok is valved slightly differently but it'll work alright.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jun 11, 2012 7:05 pm

Andyboy wrote:
Brianmoooore wrote:Either gearbox, with it's corresponding propshaft, will fit your engine, provided that the 320 engine isn't an early one with two crankshaft position sensors mounted in the bell housing.
325s use a (stronger) and longer 260 manual gearbox than the 240 fitted to the smaller six pot engines.
Autos, not manuals! And 320i's never had the two bellhousing crank sensors unless they were the ultra rare chrome bumper cars with a catalyst.

A non switchable 325i autobox will swap straight over. The valve blcok is valved slightly differently but it'll work alright.
Should really read posts more carefully before replying! Just assumed he was wanting to fit a manual box.