different coils
Moderator: martauto
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
will a 316 coil from an m40 work with a 325 m20 engine? as i need one from my engine change, if someone could help me out that would be great.
thanks.
thanks.
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
You can look on realoem and check the part numbers are the same. I think they are the same, and Im sure I left the M40 coil in place when I fitted the M20 engine to my last touring, although it was a few years ago now so might have it wrong.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Simple answer is no. Incorrect strut size and incorrect strength rating, all depending on the year and body style of both vehicles.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Jos
- E30 Zone Camper

- Posts: 1104
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: Belfast
I think he means coil as in HT coil, not springs Grrr 
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
'94 e36 tree climber
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
I have a genuine BMW/Bosch 325i coil available if you need one.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
Sorry guys I meant the HT coil
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Just checked RealOEM, and both 316i and 325i coils are the same part number.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
Brilliant thanks.Speedtouch wrote:Just checked RealOEM, and both 316i and 325i coils are the same part number.
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
One last thing don't suppose any of you lot have a 325i dizzy cam and rotor arm? The rounded shape one
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
I was going with ignition coil. Although, as a side note, I ran my 318i touring with an M20 for a couple years on the standard 45mm struts with no problems.Grrrmachine wrote:Simple answer is no. Incorrect strut size and incorrect strength rating, all depending on the year and body style of both vehicles.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Standard struts in any touring are 51mm, unless it's a diesel, or, IIRC, one of a very few early ones.
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
It was one of the first '89 318i tourings, confirmed by VIN to have 45mm struts.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Jos
- E30 Zone Camper

- Posts: 1104
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: Belfast
Mine was 45mm struts too, much to my disappointment when my H&R kit arrived
51mm ones now from a 'pina, complete with springs
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
'94 e36 tree climber
