325i engine freshen up list

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Fri May 25, 2012 6:04 pm

So.. a new thing for me to learn,and im sure would come in useful for many people too that are not too hot on engines and mechanics

with a 325i engine early high compression

what would a freshen up list of parts to service/spruce it up a bit and get it all running nice/its best be

not fluids etc, but other parts , with rough prices and best place to get them from be, and if "vital" or "worthwhile" and "can do" in terms of importance

im talking spark plugs, belts, sensors,distributor/caps,any leads worth upgrading/replacing, and all them sort of things and anything non major on a good engine, thats worth replacing to give it all nice freshen up

just want to get a list up together of what things to gather up and have it all ready to go and rough price im looking at

would appriciate any input
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri May 25, 2012 7:04 pm

theres loads of this advice all over the forum photo gallery/technical/m20 section!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri May 25, 2012 7:29 pm

For a pre facelift high comp. engine, the first thing to do is bin the primitive management system and upgrade to the considerably more sophisticated M1.3 system from a facelift car.
Apart from that, there's nothing that really can be 'upgraded', since BMW adequately specified everything in the first place. All that needs to be done is to replace anything that's not performing as it was when new, usually starting with the injectors.
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri May 25, 2012 7:45 pm

and knackered a camshaft, blocked spray bar, worn rockers, scored pistons and worn bores. Cranks in need of regrinds and shells along with worn oil pumps.

This is about the state of 95% of M20's left, in need of major top to bottom overhauls. Sad but true
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Fri May 25, 2012 8:09 pm

As above remove the spraybar, soak it in brake cleaner or something similar, drill out the holes slightly to improve oil flow and blast it through with compressed air before refitting.

Get the valve clearances properly set by someone who knows what they're doing.

Replace distributor cap & rotor arm.

Replace plugs.

Cambelt & tensioner buy the contitech kit from ECP

The rest is just standard service stuff.

Good luck mate - its all worth doing :D
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sat May 26, 2012 4:33 pm

thanks rob, what is a spray bar ? its not "upgrade" things im more fussed about, just what items to service and replace that are not too costly, to get it running nice and reliable as possible

so whats imvolved with that motronic thing then in terms of fitting it in ? easy plag and play style or more involved ? and to source one means what- get one of any latter 325i ? or have to be a sport ? what year onwards would it need to be ?

car drives nice, spent a decade in storage, so im hoping the bottom end of the engine will be decent and ok for a few years yet
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sat May 26, 2012 5:09 pm

There's no difference at all between a Sport engine and any other 325i engine; you should know that by now. The Upgrade Brian refers to is here:

http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3

And the oil spray bar is underneath the rocker cover. It sprays oil over the valve train.
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sat May 26, 2012 5:12 pm

of course i know that, but dont know anything about the electrical side and ecu, thanks for the info

in moneytary terms ££ ...how much does a full swap over to 1.3 cost roughly inc all parts and labour ?
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat May 26, 2012 6:21 pm

Clean the throttle switch out, it WILL be full of oil and check that it is set correctly so the idle and WOT are being switched properly.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Sat May 26, 2012 9:10 pm

good thread Carl and all helpful and positive comments from everyone above, there's a zone first! winkeye
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sun May 27, 2012 11:03 am

Since you missed/ignored it on the other thread you asked the very same questions;
bss325i wrote:
Kedge wrote:
polsta wrote:so whats imvolved with that motronic thing then in terms of fitting it in ? easy plag and play style or more involved ? and to source one means what- get one of any latter 325i ? or have to be a sport ? what year onwards would it need to be ?
As per most technical questions, there's extensive threads on here all about it and a wiki guide written by my very own hand.

All plug and play really, bar two wires that need cutting and moving to get the clocks working properly .Trev (B7) is selling a complete kit for £50, BARGAIN!!
AND it comes with the desirable 173 ECU.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Blitz
Married to the E30 Zone
Married to the E30 Zone
Posts: 11151
Joined: Mon Jan 30, 2006 11:00 pm
Location: East London+Basildon

Post Sun May 27, 2012 12:59 pm

I dont see the point of messing around changing the engine management system if theres nothing wrong with the one you got.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun May 27, 2012 2:51 pm

Blitz wrote:I dont see the point of messing around changing the engine management system if theres nothing wrong with the one you got.
Do you still use windows 95?
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sun May 27, 2012 3:02 pm

Blitz wrote:I dont see the point of messing around changing the engine management system if theres nothing wrong with the one you got.
would this be the case ? no nothing is wrong with mine and engine was fully operational, although now been sat for 9 months without much use

its more things like the dizzy cap and belts and general parts like that i was originaly thinking about replacing, good measure type things and get it all 100%
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun May 27, 2012 3:24 pm

The change in engine management was the reason that BMW could drop the compression ratio of the engine considerably, and not loose any performance.
bmw9818
E30 Zone Addict
E30 Zone Addict
Posts: 2561
Joined: Tue Aug 11, 2009 11:00 pm
Location: Croydon

Post Sun May 27, 2012 4:42 pm

Brianmoooore wrote:The change in engine management was the reason that BMW could drop the compression ratio of the engine considerably, and not loose any performance.
so are there any advantages performance wise possibly? with a high comp engine converted to 1.3...
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sun May 27, 2012 5:18 pm

bmw9818 wrote:
Brianmoooore wrote:The change in engine management was the reason that BMW could drop the compression ratio of the engine considerably, and not loose any performance.
so are there any advantages performance wise possibly? with a high comp engine converted to 1.3...
or is it better to leave on the standard then if not ?

how about fuel performance/fuel econemy both ways ?
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sun May 27, 2012 8:34 pm

bmw9818 wrote:
Brianmoooore wrote:The change in engine management was the reason that BMW could drop the compression ratio of the engine considerably, and not loose any performance.
so are there any advantages performance wise possibly? with a high comp engine converted to 1.3...
None unless you have it remapped, something 1.3 is easier to do.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Barx325i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6493
Joined: Wed Jul 26, 2006 11:00 pm

Post Sun May 27, 2012 8:52 pm

fundamentally 1.3 offers a far more detailed resoltion of data for the ecu to process and pass on.

withstanding any servicing items, a throttle body heater jacket bypass is worthy of the labour