manifold heat shield
Moderator: martauto
-
jimbob29
- E30 Zone Regular

- Posts: 266
- Joined: Tue Apr 26, 2011 11:00 pm
- Location: isle of wight
the left side of the shield has completely perished and was wondering if the heat from the manifold could melt or effect the ht leads in anyway?
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
Can cause them to degrade. It's advisable to have them intact. Problems occur when removing the manifold with snapped studs etc
-
pukar
- E30 Zone Addict

- Posts: 2225
- Joined: Tue Sep 08, 2009 11:00 pm
have a look at this link....i had the same problem and did a fix which is still going strong after a few years...better than a snapped bolt!
http://www.e30zone.net/modules.php?name ... highlight=
http://www.e30zone.net/modules.php?name ... highlight=
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Never seen a lead that has deteriorated because of a missing heat shield. As long as the leads are located where they should be, there won't be a problem.
Later E30s with M40 engines don't have the heat shields, although the leads have hard plastic beads on them.
Later E30s with M40 engines don't have the heat shields, although the leads have hard plastic beads on them.

