wires under inlet manifold

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
User avatar
do-drift-1
E30 Zone Newbie
E30 Zone Newbie
Posts: 143
Joined: Mon Sep 06, 2010 11:00 pm
Location: south wales mind glamorgan pontypridd

Wed May 16, 2012 3:36 pm

I have a slight missfire, and not sure what it is now, i have tried all the conventional things, afm change, sparkplug change, oil change, ht lead change. . . The only things i can think of are left to do are injectors, fuel pressure regulator, blue temp sensor. . . And then i read about these green wires that are under the inlet manifolf. . .I can't seem to locate them at the moment, but if perchance someone would be kind to me and take a picture of where they're located, i'd be eternally greatful, cheers and regards as always. . . Richard
ALWAYS WANTED A BIMMAWAHH
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Wed May 16, 2012 4:02 pm

Which engine?
mcbonio
E30 Zone Squatter
E30 Zone Squatter
Posts: 1868
Joined: Sun Feb 12, 2012 11:00 pm

Wed May 16, 2012 4:14 pm

New distributor cap and rotor arm?
User avatar
do-drift-1
E30 Zone Newbie
E30 Zone Newbie
Posts: 143
Joined: Mon Sep 06, 2010 11:00 pm
Location: south wales mind glamorgan pontypridd

Wed May 16, 2012 4:16 pm

Oh forgot to mention the engine, m20 325i, and yeah did the dizzy and rotor. . . So kinda doing a process of elimination here :S
ALWAYS WANTED A BIMMAWAHH
Rtaylor2208
E30 Zone Addict
E30 Zone Addict
Posts: 3004
Joined: Mon Oct 11, 2010 11:00 pm
Location: Ayr, Ayrshire, Scotland

Wed May 16, 2012 4:35 pm

The wiring plugs into the underside of the Throttle body. You will really need to take off the large l shapped rubber intake pipe to get access to the connection.
Post Reply