M3 rear bench.
Moderator: martauto
-
kitch
- E30 Zone Regular

- Posts: 878
- Joined: Sat Nov 01, 2008 11:00 pm
Will an M3 rear bench fit in a 4door? Or are the corner bits of the base different?
TIA
TIA

-
Steve
- E30 Zone Team Member

- Posts: 13158
- Joined: Sun Dec 19, 2004 11:00 pm
I have one fitted in mine no mods needed, it's looks bigger than the standard bench though.
I'll try and get some photos if you think it will help
I'll try and get some photos if you think it will help
webmaster@e30zone.net
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
As you've pointed out, the corners on the base are different, 4 door bases have a curved corner to make getting out easier, but a 2 door/M3 base will still fit fine.

-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
don't listen to them,it wont fit and you should sell it to me 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
It will fit but you will need cabrio female belt clips as the normal E30 bench doesn't have the raised middle section and the inset clip holders are higher (if that makes sense!) 
-
baur320
- E30 Zone Squatter

- Posts: 1507
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Tyneside
I know what you mean. I've an M3 rear seat in my 2 door and the buckles don't fit into the holders in the back section because the webbing is too short.
I checked realoem at the time and was sure that all centre buckles were the same so presumed an M3 shell had a diffent mounting point.
You sure about cab buckles?
I checked realoem at the time and was sure that all centre buckles were the same so presumed an M3 shell had a diffent mounting point.
You sure about cab buckles?
Current E30 325i, E63 630is.
Previous E21 320/4, E9 3.0 CSA, E12 525, E30 320i, E28 528i, E34 535is, E30 318i, E28 525e, E30 325i Touring, E30 Baur 327i, E36 M3 Evo, X3is, E39 530d M Sport.
Previous E21 320/4, E9 3.0 CSA, E12 525, E30 320i, E28 528i, E34 535is, E30 318i, E28 525e, E30 325i Touring, E30 Baur 327i, E36 M3 Evo, X3is, E39 530d M Sport.
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
They have the same rear seat shape don't they?
Don't know about a different mounting point though as I don't have an M3 to compare!
Anyone...????
Don't know about a different mounting point though as I don't have an M3 to compare!
Anyone...????
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
The mounting point on the M3 is different, I had in interior out of an M3 in a scrapyard years ago, on finding out the centre buckle in my 2 door didn't fit I went back for the buckle out of the M3 and found it was the same as the one already fitted.

-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
So does that mean cabs have the same mounting point as M3's then or do they have special buckles??Simon wrote:The mounting point on the M3 is different, I had in interior out of an M3 in a scrapyard years ago, on finding out the centre buckle in my 2 door didn't fit I went back for the buckle out of the M3 and found it was the same as the one already fitted.
-
baur320
- E30 Zone Squatter

- Posts: 1507
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Tyneside
What did you do in the end Simon? Don't fancy creasing the seat just to get the buckles in the holders.


Current E30 325i, E63 630is.
Previous E21 320/4, E9 3.0 CSA, E12 525, E30 320i, E28 528i, E34 535is, E30 318i, E28 525e, E30 325i Touring, E30 Baur 327i, E36 M3 Evo, X3is, E39 530d M Sport.
Previous E21 320/4, E9 3.0 CSA, E12 525, E30 320i, E28 528i, E34 535is, E30 318i, E28 525e, E30 325i Touring, E30 Baur 327i, E36 M3 Evo, X3is, E39 530d M Sport.
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
IIRC, I managed to get them into the slots, but they didn't fit all the way upto the top, so never looked tidy.

-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
On cabbies,the rear bulkhead has all the same mounting points as a saloon,but they are used differently.
The outer seatbelt mounts are used to retain the seat back,and the centre belt mount is used for the double female buckle,where the third,single,female buckle bolts in on a saloon.
Never played with an M3,so I have no information about the arrangement there!
The outer seatbelt mounts are used to retain the seat back,and the centre belt mount is used for the double female buckle,where the third,single,female buckle bolts in on a saloon.
Never played with an M3,so I have no information about the arrangement there!
Youth is wasted on the young.
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
For the purpose of improving my knowledge,Kieran,does the M3 backrest bolt in via two 10mm bolts,as in a 'normal' saloon?
Youth is wasted on the young.
-
kieran325
- Old Skooler

- Posts: 5015
- Joined: Sun Oct 30, 2005 11:00 pm
Yes it does, same fittings for both.
-
kitch
- E30 Zone Regular

- Posts: 878
- Joined: Sat Nov 01, 2008 11:00 pm
Thanks for all the info
. Looks like this could get expensive haha

-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Does that meant the bas will also fit a touring? I'd love a m3 styled rear bench
It's no good anyway for 3 people, not that it's ever used
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Best bet for a proper E30(touring)would be a custom re-trim of the existing seat frames,then use two single seatbelt fittings into the standard mount points.Jozi wrote:Does that meant the bas will also fit a touring? I'd love a m3 styled rear benchIt's no good anyway for 3 people, not that it's ever used
Remember that the saloons(lesser E30)use a structural rear bulkhead,this is replaced in touring with a stiffened floor and rear suspension upper mounts.
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
I'm thinking if I ever get it retrimmed to get them to mould a M3 type bench and get rid of the middle. Might not fold forward anymore but feck that anyway - my touring will be far from a work horse when finished.daimlerman wrote:
Best bet for a proper E30(touring)would be a custom re-trim of the existing seat frames,then use two single seatbelt fittings into the standard mount points.
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Ahh cheers didn't think of that- don't need the third belt anyway with an M3 benchdaimlerman wrote:On cabbies,the rear bulkhead has all the same mounting points as a saloon,but they are used differently.
The outer seatbelt mounts are used to retain the seat back,and the centre belt mount is used for the double female buckle,where the third,single,female buckle bolts in on a saloon.
Never played with an M3,so I have no information about the arrangement there!



