Engine fooked :(

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu May 10, 2012 8:01 pm

Could the vacuum from the inlet collapse it?
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 8:01 pm

Ill run the breather from the cam cover into a bottle and run it up the road to see how much oil is pushed out.
Image
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Thu May 10, 2012 9:12 pm

eko wrote:
DanThe wrote:Next job = compression test
Yep,fooking thing can wait till it stops raining though,cant even be arsed to go out to it :mad:
that'll be next "Summer" then :roll:

sorry to hear this Tony, hope it's not as bad as you fear
Last edited by adit on Thu May 10, 2012 10:33 pm, edited 1 time in total.
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 9:55 pm

Right just finished having a look at it.
Disconnected the breather from the MAF pipe and ran it into a coke bottle.
Just took it on a 10 minute drive and checked the bottle,its empty with just a small trace of spatter inside it,also the smoke seems to have cleared.
It has to be my lashed up breather causing the problem.
For 18 months the 2 pieces of hose have just been secured with a cable tie.
When I sorted the split ICV hose recently I replaced the cable tie with the jubilee clip.
Heres a shamefull pic of my bodge....
Image

So plan is ill do the job properly this time and just get the correct size hose and try it with that.
Will report back tomorrow when ive done it:?
Image
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Thu May 10, 2012 10:03 pm

things are sounding good .

:)
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu May 10, 2012 10:35 pm

Fingers crossed for you Tony!!
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
grantfk10
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 2926
Joined: Mon Jan 17, 2005 11:00 pm
Location: UFOland, Central Scotland

Post Thu May 10, 2012 11:24 pm

eko wrote:.
It has to be my lashed up breather causing the problem.
For 18 months the 2 pieces of hose have just been secured with a cable tie.
When I sorted the split ICV hose recently I replaced the cable tie with the jubilee clip.
Heres a shamefull pic of my bodge....
Image

So plan is ill do the job properly this time and just get the correct size hose and try it with that.
Will report back tomorrow when ive done it:?

Hope it all works out ok for you.


The above is one of the major reasons I wouldn't consider buying a car with an engine swap tho. You never know, despite how good an E30 "enthusiast" is at transplanting engines, just what has been "bodged".
Even if that make-shift job has lasted for a while, it still isn't right.....


I'll wait to be flamed now :bolt:
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 11:34 pm

grantfk10 wrote:

The above is one of the major reasons I wouldn't consider buying a car with an engine swap tho. You never know, despite how good an E30 "enthusiast" is at transplanting engines, just what has been "bodged".
Even if that make-shift job has lasted for a while, it still isn't right.....


I'll wait to be flamed now :bolt:
lol
Probably not a good time to show you a pic of my engine mountings made out of lego then :roll:
Image
User avatar
78gizmo
E30 Zone Regular
E30 Zone Regular
Posts: 265
Joined: Fri Nov 16, 2007 11:00 pm
Location: Torbay, South Devon

Post Thu May 10, 2012 11:37 pm

eko wrote: For 18 months the 2 pieces of hose have just been secured with a cable tie.
When I sorted the split ICV hose recently I replaced the cable tie with the jubilee clip.
Yet more proof cable ties are the best solution for fixing cars! :mad: Glad it looks like its sorted mate. BTW I have got the white touring on the road at last (now with M42).
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu May 10, 2012 11:43 pm

Should have just kept quiet, and turned up at your house tomorrow with the trailer and a handful of folding stuff! I've just missed a cheap, tidy M52 touring. winkeye
User avatar
grantfk10
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 2926
Joined: Mon Jan 17, 2005 11:00 pm
Location: UFOland, Central Scotland

Post Thu May 10, 2012 11:43 pm

78gizmo wrote:I have got the white touring on the road at last (now with M42).
That was my plan for my touring, but need to know it's done properly. How difficult was it?
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 11:47 pm

Brianmoooore wrote:Should have just kept quiet, and turned up at your house tomorrow with the correct size hose,some new clips and a lecture on how to do the job properly to start with
See you at 4.30 then
:D
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu May 10, 2012 11:52 pm

78gizmo wrote:
eko wrote: For 18 months the 2 pieces of hose have just been secured with a cable tie.
When I sorted the split ICV hose recently I replaced the cable tie with the jubilee clip.
Yet more proof cable ties are the best solution for fixing cars! :mad: Glad it looks like its sorted mate. BTW I have got the white touring on the road at last (now with M42).
How you doing mate?
Finally got the Touring up and running then.
They respond well to the M42,ive done a couple now.
You been in Gormans lately?
Keep meaning to pop in to see whats in but weather always shit and need waders in that place :mad:
Image
User avatar
78gizmo
E30 Zone Regular
E30 Zone Regular
Posts: 265
Joined: Fri Nov 16, 2007 11:00 pm
Location: Torbay, South Devon

Post Fri May 11, 2012 12:02 am

grantfk10 wrote:
78gizmo wrote:I have got the white touring on the road at last (now with M42).
That was my plan for my touring, but need to know it's done properly. How difficult was it?
Sorry to thread hijack Tony!
Its a dead easy swap, just took me ages to finish off and Mot due to lack of spare time. Assuming you have an M40 in it now you just need an M42 with loom, ecu, full exhaust and coil pack. The M42 will go straight onto the original gearbox, you may need to change the spigot bearing. I also had to use my M40 engine mounting arms, but its all pretty much plug and play other than making a bracket for the coil pack.
User avatar
78gizmo
E30 Zone Regular
E30 Zone Regular
Posts: 265
Joined: Fri Nov 16, 2007 11:00 pm
Location: Torbay, South Devon

Post Fri May 11, 2012 12:08 am

eko wrote:
78gizmo wrote:
eko wrote: For 18 months the 2 pieces of hose have just been secured with a cable tie.
When I sorted the split ICV hose recently I replaced the cable tie with the jubilee clip.
Yet more proof cable ties are the best solution for fixing cars! :mad: Glad it looks like its sorted mate. BTW I have got the white touring on the road at last (now with M42).
How you doing mate?
Finally got the Touring up and running then.
They respond well to the M42,ive done a couple now.
You been in Gormans lately?
Keep meaning to pop in to see whats in but weather always shit and need waders in that place :mad:
Am good thanks mate and pleased with the M42 conversion, it goes better than i expected. There were a couple of poverty spec 4pot tourings with just about everything trashed last time i went to gormans but the high tide has kept me away for a month or so!
User avatar
grantfk10
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 2926
Joined: Mon Jan 17, 2005 11:00 pm
Location: UFOland, Central Scotland

Post Fri May 11, 2012 12:09 am

Thanx for that 78gizmo, might loook into that if the touring is a keeper :wink: And it's pretty solid anyway.
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Fri May 11, 2012 10:38 am

eko wrote:
grantfk10 wrote:

The above is one of the major reasons I wouldn't consider buying a car with an engine swap tho. You never know, despite how good an E30 "enthusiast" is at transplanting engines, just what has been "bodged".
Even if that make-shift job has lasted for a while, it still isn't right.....


I'll wait to be flamed now :bolt:
lol
Probably not a good time to show you a pic of my engine
mountings made out of lego then :roll:


My Dad has used Lego on his cars in the past. He also cut a handle off a wheel barrow to weld to a tailpipe to get it through an MOT..

Hope the breather pipes the problem and that it's running good again soon..
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Fri May 11, 2012 10:07 pm

Tragedy averted :D
Replaced the breather pipe and also put a new rocker cover gasket on.
Tin of carb cleaner through the TB and took it on a good run to clear the exhaust out.
All traces of Blue smoke have gone and back to running how it should be.
Thanks to those giving advice,im a happy chap again now :wink:
Image
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Fri May 11, 2012 10:23 pm

G-Bear wrote:My Dad has used Lego on his cars in the past. He also cut a handle off a wheel barrow to weld to a tailpipe to get it through an MOT..
I have also done the wheel barrow handle exhaust bodge - someone else's suggestion, when I happened to need an extra 4" or so spliced in. It was a perfect match, and survives to this day, some 2 years on! :)
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri May 11, 2012 10:25 pm

What about the wheel barrow though?
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Fri May 11, 2012 10:31 pm

Rest assured, it was a shagged turd of a barrow, thrown away for scrap.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
User avatar
andyp
True Old Skooler
Posts: 6899
Joined: Sun Jan 09, 2005 11:00 pm
Location: LONDON

Post Fri May 11, 2012 10:37 pm

tell her i said to stop the drifting on the way there and back lol
User avatar
grantfk10
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 2926
Joined: Mon Jan 17, 2005 11:00 pm
Location: UFOland, Central Scotland

Post Fri May 11, 2012 10:43 pm

I have an old wheelbarrow that I was gonna take to the dump. Reckon I'll hang onto it for a bit longer now :wink:
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Sat May 12, 2012 12:12 am

good news Tony :clap:
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Sat May 12, 2012 8:09 am

DanThe wrote:What about the wheel barrow though?
Just happen to be at my parents at the moment. Popped into the garden. The one handled wheel barrow is still there some 15 years on, next to a shinier one with both handles on.. Must be saving it for another MOT..

Good news about the engine eko...