FFS!!!! Front Splitter
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Yes, the brass ring should be lightly greased.
Push a bit of blutac into the hole in the centre of the steering column.
Push a bit of blutac into the hole in the centre of the steering column.
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
Brian, your really going to confuse him with that old trickBrianmoooore wrote:Push a bit of blutac into the hole in the centre of the steering column.
-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
i do hope that's genuine BMW OE blu-tak you're referring to Brian

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
There is a bush there as you say, and it could conceivably wear and make a noise, but it's a long way down the list of probables.hennared323i wrote:I'll get me coat then
-
sunnyr83
- E30 Zone Addict

- Posts: 2286
- Joined: Fri Jun 05, 2009 11:00 pm
- Location: West London 'init'
What's the deal with blu-tac down the hole??
Will that stop the noise?
Will that stop the noise?
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
No, its for hiding your Hashsunnyr83 wrote:What's the deal with blu-tac down the hole??
Will that stop the noise?

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Topblag
- Old Skooler

- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
Surely you mean underneath the badge in the middle of the steering wheelRav335uk wrote:No, its for hiding your Hashsunnyr83 wrote:What's the deal with blu-tac down the hole??
Will that stop the noise?
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Sorry Colin, but i knew someone with experience would come along to confirm


If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
318isPMK
- E30 Zone Camper

- Posts: 1499
- Joined: Tue Jan 10, 2012 11:00 pm
Yeah the bluetak is confusing me a little
but thankfully I don't have access to a socket set this weekend so I'll sort it next weekend. Just in from giving it a good clean it's looking good so the only job I see to do is the steering wheel.
Oh no actually I wonder if there's something obvious that causes a vibrating steering wheel. I have had wheels balanced and tracking done and had a track rod changed and had column straightened but I'm still getting vibrations and feedback when on motorway around 60mph to 70mph nothing wrong when braking... Discs aren't much used all I can think is they may be warped but I'm at a loss. Any idea's p.s it's a niggly problem but I'd like to fix it.
Oh no actually I wonder if there's something obvious that causes a vibrating steering wheel. I have had wheels balanced and tracking done and had a track rod changed and had column straightened but I'm still getting vibrations and feedback when on motorway around 60mph to 70mph nothing wrong when braking... Discs aren't much used all I can think is they may be warped but I'm at a loss. Any idea's p.s it's a niggly problem but I'd like to fix it.
-
TouringTash
- E30 Zone Team Member

- Posts: 3803
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
come on Rav put the guy out of his misery of tapping his head working out why eh?
Have you had the front in the air/ well secured/ a pal ready to assist, then get underneath and give everything a good wobble and see what is amiss.
If you can get to Brands Hatch I'll be happy to have a look.
Have you had the front in the air/ well secured/ a pal ready to assist, then get underneath and give everything a good wobble and see what is amiss.
If you can get to Brands Hatch I'll be happy to have a look.
318i Touring
-
318isPMK
- E30 Zone Camper

- Posts: 1499
- Joined: Tue Jan 10, 2012 11:00 pm
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Who balanced the wheels and how was it done.
Sounds like a wheel balance issue to me. That our your tyres are starting to castleate. Either way it should have been fixed or pointed out to you when the wheels were on the balancer.
Sounds like a wheel balance issue to me. That our your tyres are starting to castleate. Either way it should have been fixed or pointed out to you when the wheels were on the balancer.

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Definitly your Wheels, i put money on them both or one front being buckled,318isPMK wrote: I'm still getting vibrations and feedback when on motorway around 60mph to 70mph nothing wrong when braking... Discs aren't much used all I can think is they may be warped but I'm at a loss. Any idea's p.s it's a niggly problem but I'd like to fix it.
Best way to find out, if they've all been balanced, is swap the front 2 with the rear 2 and report back.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
If his wheels are bladly buckled, he'd feel it through the steering at a much lower speed than 60+ mph.Rav335uk wrote:Definitly your Wheels, i put money on them both or one front being buckled,318isPMK wrote: I'm still getting vibrations and feedback when on motorway around 60mph to 70mph nothing wrong when braking... Discs aren't much used all I can think is they may be warped but I'm at a loss. Any idea's p.s it's a niggly problem but I'd like to fix it.
Best way to find out, if they've all been balanced, is swap the front 2 with the rear 2 and report back.
They can be slightly out of shape (most are) and still balance up!
Its still worth swapping fronts to rears and see if its any better. Cheap fix if it is. Maybe ask someone to help you with jacking it up though

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
True Dezmoundo, but i think they'll be slightly out of shape.
Like I said, swap the fronts and rears, and report back.
And take care when jacking up the car
Like I said, swap the fronts and rears, and report back.
And take care when jacking up the car

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
318isPMK
- E30 Zone Camper

- Posts: 1499
- Joined: Tue Jan 10, 2012 11:00 pm
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
It's probably for the best IMO

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
Buy a shitter for £200 and a socket set then take it apart. You'll learn everything you need to know for cheaps..
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
AGREEDDezzy wrote:It's probably for the best IMO

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL

