E30 M52
Moderator: martauto
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
Just after a bit of advice
I have a e36 328sport as my daily but it's getting to the point where i don't want to spend anymore on it as it has rust issue's and is a cat D, so to me it's not worth spending any more coin on it
My engine is fine so instead of selling the whole car for peanuts was thinking swapping it into the e30, what other parts would i need and how much roughly do you think to have someone do the full swap?
does anyone know who might take this on in east london area?
thanks for any help
I have a e36 328sport as my daily but it's getting to the point where i don't want to spend anymore on it as it has rust issue's and is a cat D, so to me it's not worth spending any more coin on it
My engine is fine so instead of selling the whole car for peanuts was thinking swapping it into the e30, what other parts would i need and how much roughly do you think to have someone do the full swap?
does anyone know who might take this on in east london area?
thanks for any help
Last edited by stu328is on Tue Apr 10, 2012 5:19 pm, edited 1 time in total.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
This website has an entire forum dedicated to the M50 and M52, as well as a comprehensive Wiki page:
http://www.e30zone.net/e30zonewiki/index.php/M5x
http://www.e30zone.net/e30zonewiki/index.php/M5x
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
it all comes to about 1200-1300 fitting and the bits give this garage a call they did mine and they are in se london : 0207 635 6792 A.M.Wstu328is wrote:Just after a bit of advice
I have a e36 328sport as my daily but it's getting to the point where i don't want to spend anymore on it as it has rust issue's and is a cat D, so to me it's not worth spending any more coin on it
My engine is fine so instead of selling the whole car for peanuts was thinking swapping it into the e30, what other parts would i need and how much roughly do you think to have someone do the full swap?
does anyone know who might take this on in east london area?
thanks for any help
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
Nice one, will have a read
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
Sorry missed this some how, cheersrich318i wrote:it all comes to about 1200-1300 fitting and the bits give this garage a call they did mine and they are in se london : 0207 635 6792 A.M.Wstu328is wrote:Just after a bit of advice
I have a e36 328sport as my daily but it's getting to the point where i don't want to spend anymore on it as it has rust issue's and is a cat D, so to me it's not worth spending any more coin on it
My engine is fine so instead of selling the whole car for peanuts was thinking swapping it into the e30, what other parts would i need and how much roughly do you think to have someone do the full swap?
does anyone know who might take this on in east london area?
thanks for any help
-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
they have done many coversions and know what they r doing. ask for andystu328is wrote:Sorry missed this some how, cheersrich318i wrote:it all comes to about 1200-1300 fitting and the bits give this garage a call they did mine and they are in se london : 0207 635 6792 A.M.Wstu328is wrote:Just after a bit of advice
I have a e36 328sport as my daily but it's getting to the point where i don't want to spend anymore on it as it has rust issue's and is a cat D, so to me it's not worth spending any more coin on it
My engine is fine so instead of selling the whole car for peanuts was thinking swapping it into the e30, what other parts would i need and how much roughly do you think to have someone do the full swap?
does anyone know who might take this on in east london area?
thanks for any help
-
sunnyr83
- E30 Zone Addict

- Posts: 2286
- Joined: Fri Jun 05, 2009 11:00 pm
- Location: West London 'init'
What's the other e30 you have??
I was planning this but found it so hard to find a decent shell to get started. 1 day.
I was planning this but found it so hard to find a decent shell to get started. 1 day.
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
Just got the one e30, the e36 is in the background


-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
like button hit! what engine is in the e30?stu328is wrote:Just got the one e30, the e36 is in the background
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
It's a 2.5, still not sure what to do really as the the engine is only on 94k
-
sunnyr83
- E30 Zone Addict

- Posts: 2286
- Joined: Fri Jun 05, 2009 11:00 pm
- Location: West London 'init'
I'd say get it done, your nearly there. Get the other bits of Danthe. Have a look at the different options.
I was going down the route of Bhups conversion
M52 and gearbox and prop
Danthe wiring loom, rack, manifold
Lightened flywheel
Brake set up of a 2.5
And couple other bit can't remember. As I said finding one was not happning!
I'd say go for it man, but get it done right once!
I was going down the route of Bhups conversion
M52 and gearbox and prop
Danthe wiring loom, rack, manifold
Lightened flywheel
Brake set up of a 2.5
And couple other bit can't remember. As I said finding one was not happning!
I'd say go for it man, but get it done right once!
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
^^^
if your. ot handy with wires danthe loom and ews delete ,danthe manis , clio servo an some mounts , use 328 box pull like a train top out at about 130-140mph ,rack is not essential me and will have e30 racks no need to mod pipes as some sayif stayin standard , but as people say its a good conversion your choice ,and sort an electric or viscous most likely will need lecy if using rubber engine mounts danthe does looms for these too if electrics are a problem basically all you need to pay for to get it in and running is danthe bits and a servo which is easy to do btw
youll defo feel te diffrence from your m20 ,
i have m50 2.5 vw-will has m52 2.8 n you can feel and see the diffrence from a rolling start in 2nd he made a good 3 car lenghs on me
if your. ot handy with wires danthe loom and ews delete ,danthe manis , clio servo an some mounts , use 328 box pull like a train top out at about 130-140mph ,rack is not essential me and will have e30 racks no need to mod pipes as some sayif stayin standard , but as people say its a good conversion your choice ,and sort an electric or viscous most likely will need lecy if using rubber engine mounts danthe does looms for these too if electrics are a problem basically all you need to pay for to get it in and running is danthe bits and a servo which is easy to do btw
youll defo feel te diffrence from your m20 ,
i have m50 2.5 vw-will has m52 2.8 n you can feel and see the diffrence from a rolling start in 2nd he made a good 3 car lenghs on me
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
Decisions decisions, it was Bhups one that got me thinking about doing it tbh
I'd have to get someone to do it for me as i haven't got the time to do it myself and couldn't be without a car for too long.
Don't get me wrong the m20 goes well enough but i imagine it will go really well with the M52 in it, the 36 feels a fair bit quicker and that's a tank compared to the e30 and why would it only do 130-140 in the e30 with the 28 box? the 36 is heavier and it pulls to an indicated 150 fairly easy, i wouldn't have though the brick shape aero of the e30 would hold it back that much
I'd have to get someone to do it for me as i haven't got the time to do it myself and couldn't be without a car for too long.
Don't get me wrong the m20 goes well enough but i imagine it will go really well with the M52 in it, the 36 feels a fair bit quicker and that's a tank compared to the e30 and why would it only do 130-140 in the e30 with the 28 box? the 36 is heavier and it pulls to an indicated 150 fairly easy, i wouldn't have though the brick shape aero of the e30 would hold it back that much
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
This is probably using an E36 direct top gear box in plae of the E30 overdrive gearbox, without changing the diff ratio to suit.stu328is wrote: and why would it only do 130-140 in the e30 with the 28 box? the 36 is heavier and it pulls to an indicated 150 fairly easy, i wouldn't have though the brick shape aero of the e30 would hold it back that much
Gives you a car with an extra sub first gear and fourth as a top gear.
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
Ah right, i'd change the diff anyway as it's a bit whiney so may as well find an LSD to suit
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
explained above its due to the 1:1 final drive , well i presume your standard diff is a 3.64 with that uoud be looking at 130-140 , but seriously do u need more than that , its going to have uber acceleration from using 3.64 ,but if you must then i think its a 2.93 or 2.65 "i think there right" but that will just be boring slow if you ask me
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It will not have 'uber acceleration' with an E36 box and an E30 diff. First gear will be useless (the gain will be negated by the time it takes to change gear) and you will effectively have a four speed gearbox.
My first M50 conversion initially had a 4.1 diff, which was great fun, lighting up the tyres at will in the lower gears, but the stop watch proved it was slow.
A 3.64 on an E30 gearbox translates to a 2.95 on an E36 box.
3.15 torsen LSD from a Z3 2.8 is an ideal choice, slots straight into an E30, and doesn't have clutch plates which wear out after about four hours of use.
My first M50 conversion initially had a 4.1 diff, which was great fun, lighting up the tyres at will in the lower gears, but the stop watch proved it was slow.
A 3.64 on an E30 gearbox translates to a 2.95 on an E36 box.
3.15 torsen LSD from a Z3 2.8 is an ideal choice, slots straight into an E30, and doesn't have clutch plates which wear out after about four hours of use.
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
how many of those diff do you cone across tho ,thats the thing everything you do depends on you budget get sorted on that then decide i rekon
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Paid £80 for mine - for the complete rear subframe, although it was a little bent!BATTS91 wrote:how many of those diff do you cone across tho ,thats the thing everything you do depends on you budget get sorted on that then decide i rekon
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
There's the cost of welding it up on top of that to consider into the budget Brian. 

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
bargain really i spose cnt find anythin lower than a 3.64 for less than £100 , i was using a 4.1 that was awfull ,1st gear non existant the 3.64 came up or £30 spot on
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
MIne uses a e36 box and 3.15 diff and is anything but boring slow.

'88 e30 328i M52 track bint.
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
My M52B30 is using a E36 M50B25 box with 3.15 diff.
Its perfect IMO.
Through the box its spot on. The only issue I have is it is just coming on song at 80mph in 5th.
Its too easy to have it off the clock
Its perfect IMO.
Through the box its spot on. The only issue I have is it is just coming on song at 80mph in 5th.
Its too easy to have it off the clock

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
stu328is
- E30 Zone Newbie

- Posts: 155
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: Essex
Cheers for all the advice chaps, I better get saving for the bits
Stu
Stu
E36 328 Sport
E30 325i
Mk2 Golf 8v
E30 325i
Mk2 Golf 8v
