Powerflex problem

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 10:03 am

Hi has anyone fitted these?

There is no orientation mark to fit them

Thanks

Image
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Apr 06, 2012 10:19 am

the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics :)
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 10:30 am

ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics :)
I will take some photo!

Thanks
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 10:35 am

ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics :)
Ok thanks:

Is it this way?
What about the where I should press in the black bit in terms of orientation

Image
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Fri Apr 06, 2012 10:47 am

Just make sure they go in to the lollipop from the from of the car facing the back, so the wishbone is keeps them in place, wrong way round, they'll be pushed out.
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Apr 06, 2012 10:51 am

Jesus wrote:
ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics :)
Ok thanks:

Is it this way?
What about the where I should press in the black bit in terms of orientation

Image
No that's wrong
It's doesn't matter about orientation of the black bits along as
there pushed in from the front and the recess is facing the front of the car you can then turn the purple bits to give you different toe in or toe out on your wheels
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 10:57 am

ross2009 wrote:
Jesus wrote:
ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics :)
Ok thanks:

Is it this way?
What about the where I should press in the black bit in terms of orientation

Image
No that's wrong
It's doesn't matter about orientation of the black bits along as
there pushed in from the front and the recess is facing the front of the car you can then turn the purple bits to give you different toe in or toe out on your wheels
Ok thanks, I just thought the black bits were eccentric too, they look it
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Apr 06, 2012 11:05 am

Like this Image
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Apr 06, 2012 11:10 am

Actually I know what you mean now The recess is off centre isn't it ?
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 11:24 am

ross2009 wrote:Actually I know what you mean now The recess is off centre isn't it ?
Hi yes the black bit is off center

Image
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Apr 06, 2012 11:30 am

they point towards the inside of the car like this

Image
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 11:35 am

ross2009 wrote:they point towards the inside of the car like this

Image
Thank you. Do they have a mark to align them or shall I use gravity?
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Apr 06, 2012 11:36 am

lol only thing youve got is your eye really it wont matter if there a little out
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Fri Apr 06, 2012 11:39 am

A 12-post thread that could have just linked straight to the Wiki, like this:

http://www.e30zone.net/e30zonewiki/inde ... pop_Bushes

The answer is the bottom photo :D
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 11:41 am

ross2009 wrote:lol only thing youve got is your eye really it wont matter if there a little out
I knew I should have bought the non eccentric ones! Less of a headache :o:
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Apr 06, 2012 11:42 am

exactly the reason why i swapped to the normal ones lol
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Apr 06, 2012 1:46 pm

Grrrmachine wrote:A 12-post thread that could have just linked straight to the Wiki, like this:

http://www.e30zone.net/e30zonewiki/inde ... pop_Bushes

The answer is the bottom photo :D
Damn that waste of internetz :)

Worth pointing out that the eccentric bush is designed to move the wheel forward which increases castor angle slightly 8)
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 1:59 pm

DanThe wrote:
Grrrmachine wrote:A 12-post thread that could have just linked straight to the Wiki, like this:

http://www.e30zone.net/e30zonewiki/inde ... pop_Bushes

The answer is the bottom photo :D
Damn that waste of internetz :)

Worth pointing out that the eccentric bush is designed to move the wheel forward which increases castor angle slightly 8)

Fantastic I like the 3 tip-ex marks did you use a micrometer to measure the thickness. There seems to be a design flaw in that Powerflex do not have a mark to align the bushes
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Apr 06, 2012 2:29 pm

Im sure the genuine m3 bushes are cheaper, no contest really..
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 2:46 pm

DanThe wrote:Im sure the genuine m3 bushes are cheaper, no contest really..
Yep.

Powerflex stuff is not that great.
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Fri Apr 06, 2012 6:06 pm

That's an interesting design.

Should have just purchased a pair of brand new M3 eccentric ones for a similar price!
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 7:11 pm

Yep will do. can give these away to a local zoner that has helped me out
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Fri Apr 06, 2012 7:11 pm

Yep will do. can give these away to a local zoner that has helped me out
User avatar
Jesus
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Dec 27, 2010 11:00 pm

Post Wed Apr 11, 2012 8:22 pm

called the powerflex technical line... rubbish.

They told me that they have sold 100's of these and that I am the first person to have a problem.

The said that a few degrees out won't matter
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Wed Apr 11, 2012 8:45 pm

whats the problem with them ? just set one one side and do the other side the same
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30