General E30 related discussions -
Please put technical questions in E30 Tech Help forum below
Moderator: martauto
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 10:03 am
Hi has anyone fitted these?
There is no orientation mark to fit them
Thanks

-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Post
Fri Apr 06, 2012 10:19 am
the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics

-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 10:30 am
ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics

I will take some photo!
Thanks
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 10:35 am
ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics

Ok thanks:
Is it this way?
What about the where I should press in the black bit in terms of orientation

-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Post
Fri Apr 06, 2012 10:47 am
Just make sure they go in to the lollipop from the from of the car facing the back, so the wishbone is keeps them in place, wrong way round, they'll be pushed out.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Post
Fri Apr 06, 2012 10:51 am
Jesus wrote:ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics

Ok thanks:
Is it this way?
What about the where I should press in the black bit in terms of orientation

No that's wrong
It's doesn't matter about orientation of the black bits along as
there pushed in from the front and the recess is facing the front of the car you can then turn the purple bits to give you different toe in or toe out on your wheels
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 10:57 am
ross2009 wrote:Jesus wrote:ross2009 wrote:the big lump on the purple bits point towards the front with the recess in the black bits also toward the front
looking at them they look the wrong way in the pics

Ok thanks:
Is it this way?
What about the where I should press in the black bit in terms of orientation

No that's wrong
It's doesn't matter about orientation of the black bits along as
there pushed in from the front and the recess is facing the front of the car you can then turn the purple bits to give you different toe in or toe out on your wheels
Ok thanks, I just thought the black bits were eccentric too, they look it
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Post
Fri Apr 06, 2012 11:10 am
Actually I know what you mean now The recess is off centre isn't it ?
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 11:24 am
ross2009 wrote:Actually I know what you mean now The recess is off centre isn't it ?
Hi yes the black bit is off center

-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Post
Fri Apr 06, 2012 11:30 am
they point towards the inside of the car like this

-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 11:35 am
ross2009 wrote:they point towards the inside of the car like this

Thank you. Do they have a mark to align them or shall I use gravity?
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Post
Fri Apr 06, 2012 11:36 am
lol only thing youve got is your eye really it wont matter if there a little out
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 11:41 am
ross2009 wrote:lol only thing youve got is your eye really it wont matter if there a little out
I knew I should have bought the non eccentric ones! Less of a headache

-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Post
Fri Apr 06, 2012 11:42 am
exactly the reason why i swapped to the normal ones lol
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Post
Fri Apr 06, 2012 1:46 pm
Damn that waste of internetz
Worth pointing out that the eccentric bush is designed to move the wheel forward which increases castor angle slightly

-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 1:59 pm
DanThe wrote:
Damn that waste of internetz
Worth pointing out that the eccentric bush is designed to move the wheel forward which increases castor angle slightly

Fantastic I like the 3 tip-ex marks did you use a micrometer to measure the thickness. There seems to be a design flaw in that Powerflex do not have a mark to align the bushes
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Post
Fri Apr 06, 2012 2:29 pm
Im sure the genuine m3 bushes are cheaper, no contest really..
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 2:46 pm
DanThe wrote:Im sure the genuine m3 bushes are cheaper, no contest really..
Yep.
Powerflex stuff is not that great.
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
Post
Fri Apr 06, 2012 6:06 pm
That's an interesting design.
Should have just purchased a pair of brand new M3 eccentric ones for a similar price!
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 7:11 pm
Yep will do. can give these away to a local zoner that has helped me out
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Fri Apr 06, 2012 7:11 pm
Yep will do. can give these away to a local zoner that has helped me out
-
Jesus
- E30 Zone Newbie

- Posts: 43
- Joined: Mon Dec 27, 2010 11:00 pm
Post
Wed Apr 11, 2012 8:22 pm
called the powerflex technical line... rubbish.
They told me that they have sold 100's of these and that I am the first person to have a problem.
The said that a few degrees out won't matter
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Post
Wed Apr 11, 2012 8:45 pm
whats the problem with them ? just set one one side and do the other side the same