M20 sounds likes a can of marbles....

Need technical Q/A then you're in the right place

Moderator: martauto

oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sat Jan 28, 2012 6:17 pm

Just spent the afternoon adjusting the valves, but the engine still sounds so tappety. I know the M20 should sound a bit like a sewing machine ticking away, but this is just so loud & annoying, like a diesel.
Any ideas....?
:(
Image
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Sat Jan 28, 2012 6:21 pm

Like a diesel doesnt sound right :eek:

Does the oil pressure light come on and go out as it should ?

Could be oil pump ?
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Sat Jan 28, 2012 6:24 pm

If you have a tubular manifold fitted? it amplifies the noises and makes everything sound much worse than it is.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Jan 28, 2012 6:45 pm

Was the engine cold or warm when you adjusted them?
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sat Jan 28, 2012 6:46 pm

Oil pressure light is normal & the manifold is standard.
Someone else also suggested the oil pump, could that really be making that racket?
Image
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sat Jan 28, 2012 6:46 pm

Rav335uk wrote:Was the engine cold or warm when you adjusted them?
Properly cold.
Image
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Jan 28, 2012 7:02 pm

What did you adjust them too??

0.30 is when the engine is warm, and 0.25 when the engine is cold.
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sat Jan 28, 2012 8:18 pm

0.25.....
I have noticed recently when driving for longer than 15mins, the oil light the does start randomly flickering.
Maybe coincidence, but this is also when the engine got noticeably louder.
Oil level is spot on & was changed not that long ago too.
Could this be a sign of the oil pump on its way out?
Image
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Jan 28, 2012 8:22 pm

Sounds like you don't have enough oil pressure for it to flicker.
You didn't lean on the oil spray bar when you did the tappets by mistake?? :?
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sat Jan 28, 2012 8:48 pm

I was quite careful not to interfere with the oil spray bar.
Image
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Jan 28, 2012 8:58 pm

Does the engine drop revs when you remove the rocker oil cap??
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sat Jan 28, 2012 9:16 pm

Haven't tried that yet, I presume if the revs drop, when removing the cap, then the oil pressure is low.
Image
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Jan 28, 2012 9:20 pm

No, if the revs drop, then you have oil pressure.
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sat Jan 28, 2012 9:23 pm

Cheers Rav, I'll check this first thing in the morning.
Image
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sun Jan 29, 2012 5:31 pm

Started the touring up this morning, took off the oil cap, the revs did drop a touch.
Didn't leave it running long enough to see if it was any different once warmed though.

I'm pretty sure it's the oil pump, which I know is a pig of a job to change.

Will probably change the engine mounts as they are looking f***ed, as well as the sump gasket, sump plug & washer.
Any advise on what else I should check/do/replace at the same time will be appreciated.
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Jan 29, 2012 5:34 pm

oomz1975 wrote: Any advise on what else I should check/do/replace at the same time will be appreciated.
The whole bottom end of the engine?
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Sun Jan 29, 2012 5:54 pm

Brianmoooore wrote:
oomz1975 wrote: Any advise on what else I should check/do/replace at the same time will be appreciated.
The whole bottom end of the engine?
Was thinking that, would be cheaper just to swap the engine with a known goodun.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sun Jan 29, 2012 5:57 pm

e301988325i wrote:
Brianmoooore wrote:
oomz1975 wrote: Any advise on what else I should check/do/replace at the same time will be appreciated.
The whole bottom end of the engine?
Was thinking that, would be cheaper just to swap the engine with a known goodun.
:eek: I was considering this too...
Image
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Sun Jan 29, 2012 9:59 pm

I found changing the spraybar makes a MASSIVE difference.. they are about £40 from BMW and it's amazing how blocked and ropey the old one will be when you get it off.. oter than that it does sound like the oil pump.. although that's quite rare on an M20!
Image
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Jan 29, 2012 11:17 pm

Sounds like your engine is knackered in need of a rebuild. The tappet setting for the engine when hot is 0.35 not 0.3

Chances are the oil pump won't be too bad
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Mon Jan 30, 2012 7:30 am

Tom_Maverick wrote:I found changing the spraybar makes a MASSIVE difference.. they are about £40 from BMW and it's amazing how blocked and ropey the old one will be when you get it off.. oter than that it does sound like the oil pump.. although that's quite rare on an M20!
You can drill the holes out on the spraybar to increase oil flow - just done mine with a 1.5mm drill which only took the holes out slightly.

After taking advice on here I had it acid dipped and have also blasted it through with brake cleaner. Tape up the spray holes first, then tape up all but one at a time to clear the holes individually.

Paying £40 for a bit of pipe with holes in is a last resort ! :eek:
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
hongkongfuey
Mad-tango-geezer
Posts: 3303
Joined: Fri Jun 08, 2007 11:00 pm
Location: portsmouth

Post Mon Jan 30, 2012 7:38 am

ive got a good, hi comp bottom end if you need?
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
clipper
E30 Zone Squatter
E30 Zone Squatter
Posts: 1980
Joined: Mon Aug 22, 2005 11:00 pm
Location: Madrid

Post Mon Jan 30, 2012 10:31 am

capri_rob wrote:
Tom_Maverick wrote:I found changing the spraybar makes a MASSIVE difference.. they are about £40 from BMW and it's amazing how blocked and ropey the old one will be when you get it off.. oter than that it does sound like the oil pump.. although that's quite rare on an M20!
You can drill the holes out on the spraybar to increase oil flow - just done mine with a 1.5mm drill which only took the holes out slightly.

After taking advice on here I had it acid dipped and have also blasted it through with brake cleaner. Tape up the spray holes first, then tape up all but one at a time to clear the holes individually.

Paying £40 for a bit of pipe with holes in is a last resort ! :eek:
I have heard of the spraybar being cleaned by threading a motorcycle clutch cable inner (like a bicycle brake cable but a bit fatter) through it, than the cable was clamped into the chuch of a drill and the drill turned on, spinning the cable inside the spraybar.

Gets out a load of crap apparently.
These are sensations as hard to forget as they are to ignore.....
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Mon Jan 30, 2012 1:22 pm

capri_rob wrote:
Tom_Maverick wrote:I found changing the spraybar makes a MASSIVE difference.. they are about £40 from BMW and it's amazing how blocked and ropey the old one will be when you get it off.. oter than that it does sound like the oil pump.. although that's quite rare on an M20!
Paying £40 for a bit of pipe with holes in is a last resort ! :eek:
lubes the entire cam and valvetrain.. I'd say £40 is fairly cheap.. also the pipe is flaired at each end and is only meant to be fitted and removed the once as these flairs crush.. you get leaks if they don't mate up properly.. also the holes are meant to 'squirt' oil at the camshaft lobes.. if you drill it out you may not be increasing oil flow but instead you may decrease the 'squirt' at the centre of the bar.. although I have heard of tricks to increase pressure to the centre holes I'm not sure what they are or if they work!
Image