Headlining removal on a touring

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Tue Jan 24, 2012 2:54 pm

disd a bit of a search but nothing useful turned up has anyone got a rough how to guide ???

Cheers
Ben
:D
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Tue Jan 24, 2012 3:04 pm

Remove anything and everything that's attached to the headlining, sun visors, check control, interior lights etc etc. Remove A, B, C and D pillar trims. The headlining is attached to the roof via a couple of clips pretty much in the centre and some more around the tailgate hinges. Release the clips from the rear and then give it a sharp tug to release the centre clips. It's possible to do it on your own but is much easier with some help.
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Tue Jan 24, 2012 3:08 pm

ok thanks rough idea how long it takes ?????also any idea where to get material for said headlining ???
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Tue Jan 24, 2012 3:45 pm

You should be able to remove it in less than 2 hours if all goes well. I got my material from a random fabric shop but made the mistake of buying non UV resistant and now the front edge has turned brown so that's another "to do" for the future. Make sure whatever material you choose isn't too heavy/thick or you'll never get nice contours around the check control and sun visor recesses.
Image

E30 zone - promoting adult illiteracy since 2004
Jos
E30 Zone Camper
E30 Zone Camper
Posts: 1104
Joined: Mon Jan 17, 2005 11:00 pm
Location: Belfast

Post Tue Jan 24, 2012 3:55 pm

http://www.e30owners.com/forums/showthread.php?t=13827

Howto, you'll have to register though.
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Post Tue Jan 24, 2012 4:02 pm

I got some beige 'suedette' of ebay for peanuts. Its good colour match, cheap(just in case mistakes) and hope to be tackling it one day.
Image
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Jan 24, 2012 4:43 pm

Assuming its a sunroof fitted car there are 4 screws which hold it in place around the sunroof aperture - IIRC you need the sunroof panel out to get at the back 2 and they may by hidden under the material where it folds over.

The stainless steel plates which are part of the sunroof surround are razor-sharo so be careful.

Its also held in place by the door rubbers and rear window rubbers.

Prep work is everything before attempting to re-cover the board - you need to remove every trace of the old adhesive & foam backing which is a royal PITA to do because it wont scrape off easily and will clog any sort of abrasive paper in seconds - and forget using any sort of solvent on it if you want your new material to stick properly afterwards.

getting it out isnt too bad but getting a nice minty one back in without damaging it is an endurance test. I wouldnt want to do another one.

Worth it though

Before :

Image
After
Image
Last edited by capri_rob on Tue Jan 24, 2012 4:58 pm, edited 1 time in total.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Tue Jan 24, 2012 4:48 pm

rob where did you get the material for yours from :D
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Jan 24, 2012 4:59 pm

Had it professionally re-trimmed - was the most expensive suede they did - cost about £300 all in 8O - it took the trimmer a full day just to get the board prepped - that old adhesive/foam is horrible stuff :x

These guys did mine :

http://www.trimtechsolutions.co.uk/

They also did a good repair to the drivers seat.

danthe put me in touch with them.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Tue Jan 24, 2012 5:08 pm

I was lucky when cleaning my board. I just ran my hands over it and all the old glue rolled up into balls. It was clean and smooth in no time :)
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Tue Jan 24, 2012 5:20 pm

sweet will give them a call i can prep it myself but cant re-trim to save my life
:D
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Tue Jan 24, 2012 5:43 pm

Give it a go, as re-trimming goes it doesn't get any easier, it's just a flat surface!
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Tue Jan 24, 2012 5:50 pm

what sort of material will be best want a black suede effect for said head lining :D
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Tue Jan 24, 2012 5:57 pm

First time I did mine I used a heavy suede which was too thick to mould to the headlining's contours. Tore that off and did it again using a thin brushed nylon and it was very easy and gave a very nice finish.
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Tue Jan 24, 2012 6:06 pm

EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Tue Jan 24, 2012 6:08 pm

I'd avoid foam backing if doing it yourself, 3mm is quite thick.
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Tue Jan 24, 2012 6:10 pm

ok will have to speak to a trimmer to get some fabric
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Jan 24, 2012 9:21 pm

Remember you need to do the sunroof liner too - this I would expect to be tricky DIY.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite