on my m20b28 the head had cracked. just waiting for the replacement head.
1) i was thinking of having the head ported and polished but my bro said to me not to get it polished as it is no good. so now dont no what to do, what do you guys/girls think about ported and polished heads.
2) the other thing im thinking of doing is a miller MAF conversion with the W.A.R chip. has anyone on here done this? is it any good?
3) should i get the valves grinded as normal or do the 3 angle valve grind
4) this is the second time that i have had a broken rocker. is there anyway i can make them stronger as i dont wont another broken one nor do i want to spend 700 notes on some.
just a few technical questions
Moderator: martauto
-
aceifty
- E30 Zone Regular

- Posts: 866
- Joined: Mon Jan 26, 2009 11:00 pm
- Location: never you mind
bump
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
1, Porting and Polishing.
It depends on who does it. If you are just randomly taking chunks out of the head, then it will be crap. It needs to be done by someone that knows what they are doing.
2, MAF & WAR Chip.
got the potential to be good, but you need to spend time tweaking the chip to suit your engine to get the best out of it.
3, Valves.
cant comment on either, but a good normal grinding wont hurt.
4, Stronger Rockers.
cant make standard ones stronger.
It depends on who does it. If you are just randomly taking chunks out of the head, then it will be crap. It needs to be done by someone that knows what they are doing.
2, MAF & WAR Chip.
got the potential to be good, but you need to spend time tweaking the chip to suit your engine to get the best out of it.
3, Valves.
cant comment on either, but a good normal grinding wont hurt.
4, Stronger Rockers.
cant make standard ones stronger.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
whats your budget?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
aceifty
- E30 Zone Regular

- Posts: 866
- Joined: Mon Jan 26, 2009 11:00 pm
- Location: never you mind
say about 200HairyScreech wrote:whats your budget?
-
aceifty
- E30 Zone Regular

- Posts: 866
- Joined: Mon Jan 26, 2009 11:00 pm
- Location: never you mind
all the work will be done by a professionalkam-325i wrote:1, Porting and Polishing.
It depends on who does it. If you are just randomly taking chunks out of the head, then it will be crap. It needs to be done by someone that knows what they are doing.
2, MAF & WAR Chip.
got the potential to be good, but you need to spend time tweaking the chip to suit your engine to get the best out of it.
3, Valves.
cant comment on either, but a good normal grinding wont hurt.
4, Stronger Rockers.
cant make standard ones stronger.
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
The only person I know who has tried the W.A.R was unable to get the best out of it without creating a whole new map which would have involved hours and hours on the dyno costing ££££££££££££££.
http://www.e30zone.net/modules.php?name ... &start=125
Rockers do break, currently new is the only viable solution, it's worth checking your oil spray bar is clear especially if it was two near to each other that broke.
http://www.e30zone.net/modules.php?name ... &start=125
Rockers do break, currently new is the only viable solution, it's worth checking your oil spray bar is clear especially if it was two near to each other that broke.
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
is that £200 for anything specific or for all 4 jobs?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I reckon on about £300 in parts/machining just for the minimum amount that's necessary (IMO) when you remove and refit a M20 head!
-
aceifty
- E30 Zone Regular

- Posts: 866
- Joined: Mon Jan 26, 2009 11:00 pm
- Location: never you mind
ill be doing all the work on it including refitting the head, a professional will be doing the porting and polishing, including the valve grind.
i would like to know if it is worth getting the head ported and polished as iv been told its a waste of money to have it polished and if i should do a normal valve grind or a 3 angle valve grind.
200 is just for the rockers. don't really want the standard ones as these is the second time iv had a rocker break in about 18months.
i would like to know if it is worth getting the head ported and polished as iv been told its a waste of money to have it polished and if i should do a normal valve grind or a 3 angle valve grind.
200 is just for the rockers. don't really want the standard ones as these is the second time iv had a rocker break in about 18months.
