M20 Head Removal

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Fri Jan 13, 2012 7:34 pm

maybe in a couple of years but i enjoy what i'm doing at the min!
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Jan 13, 2012 7:36 pm

Tay wrote:maybe in a couple of years but i enjoy what i'm doing at the min!
at least some one is ;)
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Fri Jan 13, 2012 7:39 pm

well it does mean i get to sit around alot and do my own things, and then occasionally i get to use big guns on bad people winkeye
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Fri Jan 13, 2012 7:46 pm

Tay wrote:well it does mean i get to sit around alot and masturbate furiously winkeye
I love bodger baiting!
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Fri Jan 13, 2012 7:48 pm

yep i do alot of that too............... so much infact that i'm now well practiced in both the art of lefty and righty!!!!!
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Fri Jan 13, 2012 8:01 pm

Jayzus. Call the white coats, he's gone. :mad:
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Fri Jan 13, 2012 8:09 pm

i'm not mmmmmmmmmmmmmmmmmmad?
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Fri Jan 13, 2012 8:15 pm

Not at all. Just a little 'challenged'. If you find yourself twitching whilst you're bodging, consume 10 bottles of Yakult and lie down in a dark room for 20 minutes.

Imagine.......you're doing up the main bearing caps with a hammer and chisel and.........you're back in the room, and back to reality. :D
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Fri Jan 13, 2012 8:18 pm

no just finger tight, exactly the same as the bellhousing and diff bolts! and when the pads wear down i just put another pad back plate in...........
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Fri Jan 13, 2012 8:55 pm

Tay wrote:when the pads wear down i just put another pad back plate in...........
Now I know you're an amateur. I use the heels from a pair of old shoes and cut them to size.

I'm a bit choosy when it comes to pads. Mintex, Ate, Jurid, Pagid, Clarks, Hush Puppies......
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Fri Jan 13, 2012 9:32 pm

when my tyres get a bit low i just go down the stationers and buy a bulk load of erasers and bond them to the canvas......
User avatar
Mikey_Boy
E30 Zone Regular
E30 Zone Regular
Posts: 996
Joined: Sun Mar 16, 2008 11:00 pm
Location: Cheshire - trying to avoid the bling!

Post Fri Jan 13, 2012 10:15 pm

More Andyboy and Tay exchanges............! This is better than most of the shite on TV!!!

Keep it coming... :thumb:
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Fri Jan 13, 2012 10:22 pm

Tay wrote:used to be in the middle of norfolk, now do free lance stuff around toytown
http://www.noddy.co.uk/uk/noddys-friends

Scroll down to read Tay's, aka Whiz, profile. :)
Image
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Fri Jan 13, 2012 10:39 pm

lol! keep em coming!!!!
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sat Jan 14, 2012 10:26 am

Tay wrote:when my tyres get a bit low i just go down the stationers and buy a bulk load of erasers and bond them to the canvas......
You fucking peasant! What's wrong with Wickes expanding foam?
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 10:53 am

i find it wears out to quickly, erasers grip well, wear even and last as well as an arrowspeed............
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Sat Jan 14, 2012 12:46 pm

capri_rob wrote:Its definately leaking from the front of the head - I pressure washed it all clean in the summer and since then you can see exactly where its coming from.

will the eccentric adjusters also need renewing ?
The eccentrics should be considered as a separate entity to the rockers & are more likely to be worn (flatted) than the rockers IMO.

To add to the Somerset bodging, I'm not sure where I've heard it but oil leaks in this front corner are common, a fraction extra torque on the head bolt closest when torqueing up a new gasket is often the cure.

With regards the head bolts;

http://www.reinz.de/pictures/39-00129-1 ... -low-e.pdf

Which states that torque angle method achieves +/-10% clamping force, whereas a torque setting achieves +/-30%.

The VR tech sheet states that the bolts will be permanantly stretched and should not be reused, bottoming of the thread or total failure could result.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 2:16 pm

bodge it and scarper................
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Jan 14, 2012 2:21 pm

Tay wrote:bodge it and scarper................
Hence why you are in Zommerset and not Norfolkandchance? :D
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 2:33 pm

lol fairone, albeit it was because i now work down here!!!!! mind you looking at some of the threads there are somethings on here which are far worse than what i would do................!!!!!!!!!!!!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Jan 14, 2012 7:39 pm

Tay wrote:lol fairone, albeit it was because i now work down here!!!!! mind you looking at some of the threads there are somethings on here which are far worse than what i would do................!!!!!!!!!!!!
Spend money?
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 8:03 pm

oh no i spend money, but i don't waste it!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Jan 14, 2012 8:06 pm

You should invest in a mechanics course at your local college :wink:
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 8:09 pm

what to work with utter scroat bags that just mess around? i'm too old to be arsed with that crap and have too much experience to too.........
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 8:10 pm

least i don't have to work out of my garden shed like most of you here it would seem!!!
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sat Jan 14, 2012 8:33 pm

Tay wrote:what to work with utter scroat bags that just mess around? i'm too old to be arsed with that crap and have too much experience of bodging........
winkeye

When it comes to bodging, you da man! Its heartening to see the guy who trimmed your interior shares your values. "If in doubt, lower your standards".

Let's see your workshop then. If I recall, it's a little garage with an old E39 in it.
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 8:37 pm

thats a funny old thing when it's a garage???? i have full use of my mates garage who i do part time work for and also my old bosses........ quezzies?
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 8:39 pm

oh and it might be an old one but it is what it says on the plate!
SGP
E30 Zone Regular
E30 Zone Regular
Posts: 502
Joined: Thu Aug 31, 2006 11:00 pm

Post Sat Jan 14, 2012 8:45 pm

The head bolts are designed to stretch once, and once only. Why risk all the hard work time and expense refurbishing the head - for the sake of a few quid ?
Having said that, we're all free to do what we like.
I wouldn't buy a car if I thought the bolts were re-used.
End of story.
If it ain't broke..
Fix it till it is :)
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 9:14 pm

got to do a fair bit of digging to find that out!
SGP
E30 Zone Regular
E30 Zone Regular
Posts: 502
Joined: Thu Aug 31, 2006 11:00 pm

Post Sat Jan 14, 2012 9:19 pm

That's what wories me 8)
If it ain't broke..
Fix it till it is :)
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 9:41 pm

you only buy new cars or rebuild the used ones you buy as there is no way of telling, only guessing??? even cars with fsh have hidden pasts!
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Jan 14, 2012 9:42 pm

yeah hidden after tays had hold of them !!!!!!!!!!
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sat Jan 14, 2012 9:46 pm

quite possibly but i know of alot of garages that use them again but then won't use them a third time!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Jan 14, 2012 9:52 pm

Tay wrote:quite possibly but i know of alot of garages that use them again but then won't use them a third time!
Because the engine is too shagged from the first bodged repair effort so it ends up being weighed in with the others I expect...