M20 Head Removal
Moderator: martauto
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
maybe in a couple of years but i enjoy what i'm doing at the min!
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
at least some one is ;)Tay wrote:maybe in a couple of years but i enjoy what i'm doing at the min!
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
well it does mean i get to sit around alot and do my own things, and then occasionally i get to use big guns on bad people 
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
I love bodger baiting!Tay wrote:well it does mean i get to sit around alot and masturbate furiously
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
yep i do alot of that too............... so much infact that i'm now well practiced in both the art of lefty and righty!!!!!
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Jayzus. Call the white coats, he's gone. 
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Not at all. Just a little 'challenged'. If you find yourself twitching whilst you're bodging, consume 10 bottles of Yakult and lie down in a dark room for 20 minutes.
Imagine.......you're doing up the main bearing caps with a hammer and chisel and.........you're back in the room, and back to reality.
Imagine.......you're doing up the main bearing caps with a hammer and chisel and.........you're back in the room, and back to reality.
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
no just finger tight, exactly the same as the bellhousing and diff bolts! and when the pads wear down i just put another pad back plate in...........
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Now I know you're an amateur. I use the heels from a pair of old shoes and cut them to size.Tay wrote:when the pads wear down i just put another pad back plate in...........
I'm a bit choosy when it comes to pads. Mintex, Ate, Jurid, Pagid, Clarks, Hush Puppies......
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
when my tyres get a bit low i just go down the stationers and buy a bulk load of erasers and bond them to the canvas......
-
Mikey_Boy
- E30 Zone Regular

- Posts: 996
- Joined: Sun Mar 16, 2008 11:00 pm
- Location: Cheshire - trying to avoid the bling!
More Andyboy and Tay exchanges............! This is better than most of the shite on TV!!!
Keep it coming...
Keep it coming...
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
http://www.noddy.co.uk/uk/noddys-friendsTay wrote:used to be in the middle of norfolk, now do free lance stuff around toytown
Scroll down to read Tay's, aka Whiz, profile.

-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
You fucking peasant! What's wrong with Wickes expanding foam?Tay wrote:when my tyres get a bit low i just go down the stationers and buy a bulk load of erasers and bond them to the canvas......
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
i find it wears out to quickly, erasers grip well, wear even and last as well as an arrowspeed............
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
The eccentrics should be considered as a separate entity to the rockers & are more likely to be worn (flatted) than the rockers IMO.capri_rob wrote:Its definately leaking from the front of the head - I pressure washed it all clean in the summer and since then you can see exactly where its coming from.
will the eccentric adjusters also need renewing ?
To add to the Somerset bodging, I'm not sure where I've heard it but oil leaks in this front corner are common, a fraction extra torque on the head bolt closest when torqueing up a new gasket is often the cure.
With regards the head bolts;
http://www.reinz.de/pictures/39-00129-1 ... -low-e.pdf
Which states that torque angle method achieves +/-10% clamping force, whereas a torque setting achieves +/-30%.
The VR tech sheet states that the bolts will be permanantly stretched and should not be reused, bottoming of the thread or total failure could result.
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
bodge it and scarper................
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Hence why you are in Zommerset and not Norfolkandchance?Tay wrote:bodge it and scarper................
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
lol fairone, albeit it was because i now work down here!!!!! mind you looking at some of the threads there are somethings on here which are far worse than what i would do................!!!!!!!!!!!!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Spend money?Tay wrote:lol fairone, albeit it was because i now work down here!!!!! mind you looking at some of the threads there are somethings on here which are far worse than what i would do................!!!!!!!!!!!!
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
oh no i spend money, but i don't waste it!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
You should invest in a mechanics course at your local college 
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
what to work with utter scroat bags that just mess around? i'm too old to be arsed with that crap and have too much experience to too.........
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
least i don't have to work out of my garden shed like most of you here it would seem!!!
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Tay wrote:what to work with utter scroat bags that just mess around? i'm too old to be arsed with that crap and have too much experience of bodging........
When it comes to bodging, you da man! Its heartening to see the guy who trimmed your interior shares your values. "If in doubt, lower your standards".
Let's see your workshop then. If I recall, it's a little garage with an old E39 in it.
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
thats a funny old thing when it's a garage???? i have full use of my mates garage who i do part time work for and also my old bosses........ quezzies?
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
oh and it might be an old one but it is what it says on the plate!
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
The head bolts are designed to stretch once, and once only. Why risk all the hard work time and expense refurbishing the head - for the sake of a few quid ?
Having said that, we're all free to do what we like.
I wouldn't buy a car if I thought the bolts were re-used.
End of story.
Having said that, we're all free to do what we like.
I wouldn't buy a car if I thought the bolts were re-used.
End of story.
If it ain't broke..
Fix it till it is
Fix it till it is
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
got to do a fair bit of digging to find that out!
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
That's what wories me 
If it ain't broke..
Fix it till it is
Fix it till it is
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
you only buy new cars or rebuild the used ones you buy as there is no way of telling, only guessing??? even cars with fsh have hidden pasts!
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
yeah hidden after tays had hold of them !!!!!!!!!!
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
quite possibly but i know of alot of garages that use them again but then won't use them a third time!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Because the engine is too shagged from the first bodged repair effort so it ends up being weighed in with the others I expect...Tay wrote:quite possibly but i know of alot of garages that use them again but then won't use them a third time!

