Manual to auto sunroof

Need technical Q/A then you're in the right place

Moderator: martauto

MIDNIGHT-RACER
E30 Zone Newbie
E30 Zone Newbie
Posts: 53
Joined: Sun Dec 04, 2011 11:00 pm

Post Thu Jan 12, 2012 6:27 am

Hi Zoners! Hope your all well!
Ive just bought a sunroof motor from a fellow zoner and was wondering how to go about fitting this, i have the front panel aswell with the open/close switch. Any advice wld be brill! Is there any other part i wld need apart from the ones ive already listed?

Thanx
Mitz
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Jan 12, 2012 8:56 am

Ideally, you need the whole motor assembly and mounting plate, complete with the guide tubes.
It's been a while since I did one of these, but there are subtle differences between the backplates for each type, which at first sight appears to be the same for manual and electric.
The three threaded holes that the motor mounts to do not have quite the correct spacing, and there is a difference in height of one of the mountings.
All this can be overcome (and I did on the first one I ever converted), but it's easier to swap in the whole thing.
milescook
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Thu Jan 13, 2011 11:00 pm
Location: The 'bran of Cwm

Post Thu Jan 12, 2012 12:55 pm

Do you have the sunroof motor loom? If not message me I have one spare for only a few notes :)
The story so far... http://www.cookracing.co.uk/

Also please help the race budget by watching some videos :) https://www.youtube.com/cookracinguk
bmw9818
E30 Zone Addict
E30 Zone Addict
Posts: 2561
Joined: Tue Aug 11, 2009 11:00 pm
Location: Croydon

Post Thu Jan 12, 2012 4:29 pm

i did mine few years back when i got my one, you need to remove the black plate, grind the rivet and it should pop off, cant remember how it goes, but once you get the old mounting plate off, just line up the new one, think it just bolts to the rail, bronze peice section,

i think the bolts on the guide rail are the same? i used the manual one,
MIDNIGHT-RACER
E30 Zone Newbie
E30 Zone Newbie
Posts: 53
Joined: Sun Dec 04, 2011 11:00 pm

Post Thu Jan 12, 2012 7:22 pm

I have the loom, thanx bud... Still sounds like rocket science to me.. Lol
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Thu Jan 12, 2012 7:31 pm

I tried removing one the other day. Ended up me loosing my temper and peices being bent up in anger... Good luck putting one in mate! winkeye
bmw9818
E30 Zone Addict
E30 Zone Addict
Posts: 2561
Joined: Tue Aug 11, 2009 11:00 pm
Location: Croydon

Post Thu Jan 12, 2012 11:42 pm

Jim320i wrote:I tried removing one the other day. Ended up me loosing my temper and peices being bent up in anger... Good luck putting one in mate! winkeye
Lol exactly what I did, pair of pliers bending it to fit, I eventually figured it out