white electrical harness door plug replacement?

Need technical Q/A then you're in the right place

Moderator: martauto

d1mkaz
E30 Zone Regular
E30 Zone Regular
Posts: 794
Joined: Thu Jan 03, 2008 11:00 pm
Location: London

Post Thu Jan 05, 2012 3:00 pm

may be someone have done this before? I need to change the white plastic plug (both parts) that connects the doors wiring harness. Plugs are not expensive but how difficult to replace them? thanks
d1mkaz
E30 Zone Regular
E30 Zone Regular
Posts: 794
Joined: Thu Jan 03, 2008 11:00 pm
Location: London

Post Sun Jan 08, 2012 4:53 pm

so it's never done then
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sun Jan 08, 2012 5:07 pm

you can buy a special tool that slides down the pin holes that allow you to pull the pin out and replace the pin without replacing the whole plug assembly, i had had both of mine done by a friend of mine who works for sorensons bmw in kings lynn, took him about an hour to replace them. you can buy the pins both male and female from bmw but you can only buy them by the hundred!!! i do happen to have about 80 od left!!!!!
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Jan 08, 2012 5:49 pm

The plugs are called C404 and C405, and their pinouts are in the Wiki.
d1mkaz
E30 Zone Regular
E30 Zone Regular
Posts: 794
Joined: Thu Jan 03, 2008 11:00 pm
Location: London

Post Sun Jan 08, 2012 6:03 pm

thanks, I ordered the plugs from Cotswold BMW's, unfortunately I need to replace my old ones completely as w~~s in the garage broke it takin' the door off. If I can get that tool, I think I'll be fine. Any links to it??? Where should I look? thanks again
User avatar
Tay
E30 Zone Regular
E30 Zone Regular
Posts: 343
Joined: Mon Feb 06, 2006 11:00 pm

Post Sun Jan 08, 2012 8:25 pm

i would imagine that should be able to get hold of a tol that'll do the job from an electrical supplyer???? just take it a pin and see what they can do??? i wold replace any corroded pins if you have any!