white electrical harness door plug replacement?
Moderator: martauto
-
d1mkaz
- E30 Zone Regular

- Posts: 794
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: London
may be someone have done this before? I need to change the white plastic plug (both parts) that connects the doors wiring harness. Plugs are not expensive but how difficult to replace them? thanks
-
d1mkaz
- E30 Zone Regular

- Posts: 794
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: London
so it's never done then
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
you can buy a special tool that slides down the pin holes that allow you to pull the pin out and replace the pin without replacing the whole plug assembly, i had had both of mine done by a friend of mine who works for sorensons bmw in kings lynn, took him about an hour to replace them. you can buy the pins both male and female from bmw but you can only buy them by the hundred!!! i do happen to have about 80 od left!!!!!
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
The plugs are called C404 and C405, and their pinouts are in the Wiki.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
d1mkaz
- E30 Zone Regular

- Posts: 794
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: London
thanks, I ordered the plugs from Cotswold BMW's, unfortunately I need to replace my old ones completely as w~~s in the garage broke it takin' the door off. If I can get that tool, I think I'll be fine. Any links to it??? Where should I look? thanks again
-
Tay
- E30 Zone Regular

- Posts: 343
- Joined: Mon Feb 06, 2006 11:00 pm
i would imagine that should be able to get hold of a tol that'll do the job from an electrical supplyer???? just take it a pin and see what they can do??? i wold replace any corroded pins if you have any!
