Rear Offside wheel arch
325i Rear end restoration
Moderator: martauto
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Stage one
Rear Offside wheel arch
Rear Offside wheel arch
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
adit
- Married to the E30 Zone
- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
there's some work to be done there. same the other side?
E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
blimey, that's a job not for the faint hearted, should be a fun challenge, wish you all the best with it mate
-
tonybtonyb
- E30 Zone Addict
- Posts: 3580
- Joined: Wed Jun 13, 2007 11:00 pm
- Location: essex
good luck mate 
They don't make bm's like this anymore!..They should.
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
The other side was not as bad, mainly where the inner arch met the outer arch.adit wrote:there's some work to be done there. same the other side?
This side is bad because whoever had the car before me covered it all up with filler.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
leeparkes
- Married to the E30 Zone
- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
that would save me a BIG headache....!!!!
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
Duke137
- Married to the E30 Zone
- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
That panel should help you out Keith, keep the progress coming!
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Rear bumper removal:
Is it just the two torx bolts that hold on the rear bumper or are there some other clips ?
Is it just the two torx bolts that hold on the rear bumper or are there some other clips ?
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
capri_rob
- Married to the E30 Zone
- Posts: 9681
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
![The black plastic cover in the centre ... pg[/img]](The%20black%20plastic%20cover%20in%20the%20centre%20of%20this%20pic%20-%20you%20need%20to%20remove%20it%20and%20check%20there%20are%20no%20nasties%20lurking%20behind%20-%20very%20common%20:%0A%0A%5Bimg%5Dhttp%3A//i269.photobucket.com/albums/jj73/capri_rob/IMG00299-20110716-1719.jpg%5B/img%5D){kind=link}
e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Thats off this afternoon, and all is good.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
capri_rob
- Married to the E30 Zone
- Posts: 9681
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Nice one.
Also check the fittings at the top of the wheelarch where the breather "bottle" fits to and the mountings for the filler neck.
Also check the fittings at the top of the wheelarch where the breather "bottle" fits to and the mountings for the filler neck.
e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
No luck there thou,thats all gone.capri_rob wrote:Nice one.
Also check the fittings at the top of the wheelarch.
About an Inch square hole....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Expansion Tank Bracket
Behind plastic panel on rear arch
Behind plastic panel on rear arch
Pete don't care about colour, He would shag a rainbow if he could find the end of it....