325i Cab Passenger Window

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Wed Jan 04, 2012 7:59 am

Please could someone give me tips / advice about an electric passenger window that works very very very slowly and then stops. Mechanism or motor?

Thanks in advance!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Jan 04, 2012 9:07 am

Need to know which type of mech. you have. Two completely different kinds fitted to E30s - an 'S' shaped tube with a spiral cable on earlier stuff, and a more conventional scissors arrangement on later stuff.
There was also a dealer fitted windows' kit that is different again, just to complicate things a bit more.
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Wed Jan 04, 2012 3:55 pm

Thanks for the response Brianmoooore, I have an 86' 325i Sport Convertible, everything is standard as far as I know, I am the 3rd owner. Is this enough info for you or do I have to pull the door card off?
sweep
Married to the E30 Zone
Married to the E30 Zone
Posts: 10110
Joined: Sat Mar 15, 2008 11:00 pm
Location: spares & repairs in sheffield

Post Wed Jan 04, 2012 4:18 pm

i have a mecanism/motor from a 1987 car
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Jan 04, 2012 6:37 pm

Yours will be the earlier type. Clean off all the old hard grease on the cable, replace with fresh stuff, and a little silicon grease for the glass guides, and things should be back to normal.
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Wed Jan 04, 2012 8:07 pm

Thanks for the tip Brianmoooore, I will give it a try on the week end.

Sweep, if I end up requiring parts I will let you know.

Thanks