Best way of removing under carpet tar?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
hazd31
E30 Zone Squatter
E30 Zone Squatter
Posts: 1689
Joined: Sat Feb 07, 2009 11:00 pm
Location: west sussex, nr brighton

Post Sun Dec 18, 2011 5:07 pm

As obove, is it just a case of chissleing away or is there a better method?
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Dec 18, 2011 5:10 pm

Petrol or thinners will soften it up a bit, as will some heat. But yes, it is really a case of thunk thunk thunk with the mallet and chisel.
User avatar
hazd31
E30 Zone Squatter
E30 Zone Squatter
Posts: 1689
Joined: Sat Feb 07, 2009 11:00 pm
Location: west sussex, nr brighton

Post Sun Dec 18, 2011 5:14 pm

I got shouted at for suggesting a heat gun! Good job for the missus :)
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Dec 18, 2011 5:22 pm

I was welding the floor a few months back. That softened the surrounding tar enough to peel it away by hand :D
milescook
E30 Zone Camper
E30 Zone Camper
Posts: 1285
Joined: Thu Jan 13, 2011 11:00 pm
Location: The 'bran of Cwm

Post Sun Dec 18, 2011 5:26 pm

Heat gun every day for me - they aren't expensive and make peeling the stuff off effortless. Clean up with some spirts and rag and it works a treat. Just do a quick search for "remove heat shielding" here this is the advice usualy given out.
The story so far... http://www.cookracing.co.uk/

Also please help the race budget by watching some videos :) https://www.youtube.com/cookracinguk
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Sun Dec 18, 2011 8:24 pm

heat gun :)
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Dec 18, 2011 9:32 pm

Heat gun, hammer and chisel if your a monkey :)
bigbird76
E30 Zone Regular
E30 Zone Regular
Posts: 571
Joined: Sat Feb 16, 2008 11:00 pm
Location: Swansea Wales UK

Post Mon Dec 19, 2011 9:04 pm

Heat gun and scraper and some patience dont burn it just warm it up in a 6" area and run the scraper under it and just heat up and follow it along.

Did all my M3 that way no hammers or chisels required.

Leigh