Crankshaft bolt - Windy gun?

Need technical Q/A then you're in the right place

Moderator: martauto

Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sat Dec 17, 2011 5:36 pm

I'll be taking out my M20B20 soon, and since it broke its cambelt it's worth f-all as a complete unit, so I'll be breaking it up.

I've heard the idea of using a breaker bar to lock the crank in place, and then using the starter motor to break the nut, BUT would a pneumatic air gun also have the grunt needed to shift the bolt?
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Sat Dec 17, 2011 5:58 pm

I have used one but it was a 3/4 drive one, came off no probs with that beast
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Dec 17, 2011 7:09 pm

it needs to have enough grunt to undo 400 Nm thats wht there torqued up to :)
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sat Dec 17, 2011 7:36 pm

Good stuff! My windy gun isn't the most powerful beast, but it's rated at nearly 700Nm, so it should shift if :D