I'll be taking out my M20B20 soon, and since it broke its cambelt it's worth f-all as a complete unit, so I'll be breaking it up.
I've heard the idea of using a breaker bar to lock the crank in place, and then using the starter motor to break the nut, BUT would a pneumatic air gun also have the grunt needed to shift the bolt?
Crankshaft bolt - Windy gun?
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
I have used one but it was a 3/4 drive one, came off no probs with that beast
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
it needs to have enough grunt to undo 400 Nm thats wht there torqued up to 
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Good stuff! My windy gun isn't the most powerful beast, but it's rated at nearly 700Nm, so it should shift if 
'89 325i Touring | Touring Resto Thread | In-Dash Screen install

