my m20b28 does not have a oxygen sensor will that make any difference. it was a m20b20 before.
if it needs one how can i put one on?
oxygen sensor
Moderator: martauto
-
aceifty
- E30 Zone Regular

- Posts: 866
- Joined: Mon Jan 26, 2009 11:00 pm
- Location: never you mind
Last edited by aceifty on Wed Dec 14, 2011 7:41 pm, edited 1 time in total.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Your what? "m2b28"?
-
aceifty
- E30 Zone Regular

- Posts: 866
- Joined: Mon Jan 26, 2009 11:00 pm
- Location: never you mind
Bump
1989 cab M20B28 build
http://www.e30zone.net/modules.php?name ... highlight=
http://www.e30zone.net/modules.php?name ... highlight=
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
When the question makes sense, you may get a reply!Brianmoooore wrote:Your what? "m2b28"?
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
m20b28
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Assuming you're using a M20 ECU, it doesn't need a lambda sensor, although it can be used with one. The purpose of the lambda sensor is primarily to protect the catalytic converter from damage, so there's not much point in adding one.
If you do want to add one, you'll need to weld a M16 thin nut to one of the downpipes, and drill a hole into the pipe. Just above the bottom bend on the inner pipe is where I fit them. High enough to be protected from damage, and still accessible.
If you do want to add one, you'll need to weld a M16 thin nut to one of the downpipes, and drill a hole into the pipe. Just above the bottom bend on the inner pipe is where I fit them. High enough to be protected from damage, and still accessible.
