under intake manifold n/s

Need technical Q/A then you're in the right place

Moderator: martauto

imye30
E30 Zone Regular
E30 Zone Regular
Posts: 554
Joined: Thu May 27, 2010 11:00 pm
Location: manchester

Post Sat Dec 10, 2011 8:16 pm

as above there is a connector with pins any one know what is that called for some reason seem to have oil around that area an just above there is a valve well looks like it has a push in pin connector that tube seams to have a leak an has oil marks any one help
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 10, 2011 8:49 pm

And your engine is?
imye30
E30 Zone Regular
E30 Zone Regular
Posts: 554
Joined: Thu May 27, 2010 11:00 pm
Location: manchester

Post Sat Dec 10, 2011 9:00 pm

325i from a 1988 f reg
User avatar
e30-325iS
E30 Zone Newbie
E30 Zone Newbie
Posts: 14
Joined: Wed Oct 12, 2011 11:00 pm
Location: Australia

Post Sun Dec 11, 2011 9:57 am

The connector connects the temperature sensors and injectors to the rest of the harness. Check for corrosion around any of the pins as it can cause all sorts of problems. The valve and tube are the purge solenoid, the tube connects to the throttle body behind the tps. if it is disconnected or has perished you will get a vaccuum leak.
imye30
E30 Zone Regular
E30 Zone Regular
Posts: 554
Joined: Thu May 27, 2010 11:00 pm
Location: manchester

Post Sun Dec 11, 2011 9:38 pm

can it be re placed
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Dec 11, 2011 9:45 pm

I very much doubt that you'll find a purge solenoid on a F reg. UK car. This is part of the emissions package, and while these cars were often sold new to people with more money than sense, not many of them ticked this expensive option