under intake manifold n/s
Moderator: martauto
-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
as above there is a connector with pins any one know what is that called for some reason seem to have oil around that area an just above there is a valve well looks like it has a push in pin connector that tube seams to have a leak an has oil marks any one help
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
And your engine is?
-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
325i from a 1988 f reg
-
e30-325iS
- E30 Zone Newbie

- Posts: 14
- Joined: Wed Oct 12, 2011 11:00 pm
- Location: Australia
The connector connects the temperature sensors and injectors to the rest of the harness. Check for corrosion around any of the pins as it can cause all sorts of problems. The valve and tube are the purge solenoid, the tube connects to the throttle body behind the tps. if it is disconnected or has perished you will get a vaccuum leak.
-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
can it be re placed
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I very much doubt that you'll find a purge solenoid on a F reg. UK car. This is part of the emissions package, and while these cars were often sold new to people with more money than sense, not many of them ticked this expensive option
