Hi all
I have a E36 steering rack that I am changing from the E30 unit, question is that can I change the E36 steering rack ends to the E30 ends to accommodate the E30 track rod ends I have?
Thanks
Ben
E30-E36 steering rack question
Moderator: martauto
-
Driftben
- E30 Zone Camper

- Posts: 1144
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Westgate on Sea

6pot wilwoods front
4pot Porsche rear
89 E30 stripped running a 6speed V8
Twin Turbo M60 in progress
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
If you want to use E30 rod ends you need to fit E30 inner tie rods too.
-
Driftben
- E30 Zone Camper

- Posts: 1144
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Westgate on Sea
Well I have found a guy selling them on eBay for like £12 each so that will be the route I'll take. It's just that it looks like the E36 track rods are almost welded to the steering rack ;)
Thanks Beemerlad
Thanks Beemerlad

6pot wilwoods front
4pot Porsche rear
89 E30 stripped running a 6speed V8
Twin Turbo M60 in progress
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
I just kept the E36 ends on mine
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
either will work, but e30 ones are more "factory", use both the inners and outers of either the e30 or e36.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
The only downside of the E36 ends is the ball joint/housings are larger which can create problems if you fit non standard discs or wheels
