E30-E36 steering rack question

Need technical Q/A then you're in the right place

Moderator: martauto

Driftben
E30 Zone Camper
E30 Zone Camper
Posts: 1144
Joined: Sun Sep 28, 2008 11:00 pm
Location: Westgate on Sea

Post Thu Dec 08, 2011 9:54 pm

Hi all
I have a E36 steering rack that I am changing from the E30 unit, question is that can I change the E36 steering rack ends to the E30 ends to accommodate the E30 track rod ends I have?

Thanks
Ben
Image
6pot wilwoods front
4pot Porsche rear
89 E30 stripped running a 6speed V8
Twin Turbo M60 in progress
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Thu Dec 08, 2011 10:00 pm

If you want to use E30 rod ends you need to fit E30 inner tie rods too.
Driftben
E30 Zone Camper
E30 Zone Camper
Posts: 1144
Joined: Sun Sep 28, 2008 11:00 pm
Location: Westgate on Sea

Post Thu Dec 08, 2011 10:08 pm

Well I have found a guy selling them on eBay for like £12 each so that will be the route I'll take. It's just that it looks like the E36 track rods are almost welded to the steering rack ;)

Thanks Beemerlad
Image
6pot wilwoods front
4pot Porsche rear
89 E30 stripped running a 6speed V8
Twin Turbo M60 in progress
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Thu Dec 08, 2011 10:29 pm

I just kept the E36 ends on mine
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Thu Dec 08, 2011 10:44 pm

either will work, but e30 ones are more "factory", use both the inners and outers of either the e30 or e36.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 09, 2011 8:50 am

The only downside of the E36 ends is the ball joint/housings are larger which can create problems if you fit non standard discs or wheels