M3 doors..

Need technical Q/A then you're in the right place

Moderator: martauto

Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu Dec 08, 2011 1:12 pm

.. Same as non M3 doors without holes for the rub strip?
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Thu Dec 08, 2011 1:13 pm

i always thought the M3 had a different wind screen angle and A pillar angle, if so the doors would need to match?
Image
suchy
True Zone Relic
Posts: 6604
Joined: Tue Apr 26, 2005 11:00 pm
Location: Portsmouth

Post Thu Dec 08, 2011 1:16 pm

I wasn't aware of any shared panels??
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu Dec 08, 2011 1:17 pm

Not sure, it was mentioned to me the other day, so thought I'd ask.

I think it's the rear screen that is angled differently.

Technically it's not a shared panel as it IS different. Some front end panels (skeleton) are the same as regular chromies.
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
suchy
True Zone Relic
Posts: 6604
Joined: Tue Apr 26, 2005 11:00 pm
Location: Portsmouth

Post Thu Dec 08, 2011 1:20 pm

No holestrip would make it a different dealer panel I guess. I've also wondered about the bonnet also as it looks the same to me, just figured it may be a dlightly different bulkhead shape due to bonded screen?
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Thu Dec 08, 2011 1:20 pm

i know the bonnet is same part, and i know the rear window is completely different but i seem to remember that the front was different too.
Image
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Thu Dec 08, 2011 1:22 pm

I believe the doors are the same. I sold some doors to a bloke who races M3's and he said they were the same minus the holes.
Image
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu Dec 08, 2011 1:25 pm

Bonnet is deffo the same.

Front screen is different as it is bonded.

I think the angle is the same though. Scuttle is M3 specific, A pillar is not.
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Thu Dec 08, 2011 5:59 pm

the angle is the same, the only difference is the m3 screen is bonded as said. You can do this to a regular e30. Demlot did it a few years ago.

The doors are the same bar the hole difference for the rubbing strip on a normal e30. Bonnet is the only interchange panel with no mods.

Its the rear screen angle thats different not the front
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu Dec 08, 2011 7:38 pm

Cheers Simon. As I thought. :)
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Fri Dec 09, 2011 8:44 am

normal E30 doors also have a recess for the rubbing strip Dan, filling that would be a sad job..
IIRC M3 doors have an impact bar inside, Drivers side (LHD)
the only difference at the back is the rear hoop which extends the parcel shelf, all rear quarter glass is the same for any 2 door E30
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Fri Dec 09, 2011 8:54 am

Part numbers are different.

Normal E30 door 41 51 8 106 932

M3 door 41 51 1 965 019

I always thought they were different from the rubber strip line downwards.
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 09, 2011 9:05 am

Nothing a bit of pudding wont solve :)
Most track car M3's have the front screen changed to a standard E30 type, they are cheaper to replace and easy to fit/remove
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Fri Dec 09, 2011 9:05 am

e30topless wrote:normal E30 doors also have a recess for the rubbing strip Dan, filling that would be a sad job..
IIRC M3 doors have an impact bar inside, Drivers side (LHD)
the only difference at the back is the rear hoop which extends the parcel shelf, all rear quarter glass is the same for any 2 door E30
Image

They do as well.. Definitely a bit of sad job to sort that!

Still available new I think.

(Forgot to resort that blooming courier! Head in the clouds.. :o: )
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Fri Dec 09, 2011 9:19 am

Arse ! Mr 13 won't be happy about that :P
no probs on the courier dan just let me know when ect, PM beardymatt he has a few door knocking about IIRC :D