M3 doors..
Moderator: martauto
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
.. Same as non M3 doors without holes for the rub strip?
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
i always thought the M3 had a different wind screen angle and A pillar angle, if so the doors would need to match?

-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
I wasn't aware of any shared panels??
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Not sure, it was mentioned to me the other day, so thought I'd ask.
I think it's the rear screen that is angled differently.
Technically it's not a shared panel as it IS different. Some front end panels (skeleton) are the same as regular chromies.
I think it's the rear screen that is angled differently.
Technically it's not a shared panel as it IS different. Some front end panels (skeleton) are the same as regular chromies.
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
No holestrip would make it a different dealer panel I guess. I've also wondered about the bonnet also as it looks the same to me, just figured it may be a dlightly different bulkhead shape due to bonded screen?
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
i know the bonnet is same part, and i know the rear window is completely different but i seem to remember that the front was different too.

-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
I believe the doors are the same. I sold some doors to a bloke who races M3's and he said they were the same minus the holes.

-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Bonnet is deffo the same.
Front screen is different as it is bonded.
I think the angle is the same though. Scuttle is M3 specific, A pillar is not.
Front screen is different as it is bonded.
I think the angle is the same though. Scuttle is M3 specific, A pillar is not.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
the angle is the same, the only difference is the m3 screen is bonded as said. You can do this to a regular e30. Demlot did it a few years ago.
The doors are the same bar the hole difference for the rubbing strip on a normal e30. Bonnet is the only interchange panel with no mods.
Its the rear screen angle thats different not the front
The doors are the same bar the hole difference for the rubbing strip on a normal e30. Bonnet is the only interchange panel with no mods.
Its the rear screen angle thats different not the front
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Cheers Simon. As I thought. 
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
normal E30 doors also have a recess for the rubbing strip Dan, filling that would be a sad job..
IIRC M3 doors have an impact bar inside, Drivers side (LHD)
the only difference at the back is the rear hoop which extends the parcel shelf, all rear quarter glass is the same for any 2 door E30
IIRC M3 doors have an impact bar inside, Drivers side (LHD)
the only difference at the back is the rear hoop which extends the parcel shelf, all rear quarter glass is the same for any 2 door E30
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Part numbers are different.
Normal E30 door 41 51 8 106 932
M3 door 41 51 1 965 019
I always thought they were different from the rubber strip line downwards.
Normal E30 door 41 51 8 106 932
M3 door 41 51 1 965 019
I always thought they were different from the rubber strip line downwards.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Nothing a bit of pudding wont solve
Most track car M3's have the front screen changed to a standard E30 type, they are cheaper to replace and easy to fit/remove
Most track car M3's have the front screen changed to a standard E30 type, they are cheaper to replace and easy to fit/remove
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
e30topless wrote:normal E30 doors also have a recess for the rubbing strip Dan, filling that would be a sad job..
IIRC M3 doors have an impact bar inside, Drivers side (LHD)
the only difference at the back is the rear hoop which extends the parcel shelf, all rear quarter glass is the same for any 2 door E30

They do as well.. Definitely a bit of sad job to sort that!
Still available new I think.
(Forgot to resort that blooming courier! Head in the clouds..
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
Arse ! Mr 13 won't be happy about that
no probs on the courier dan just let me know when ect, PM beardymatt he has a few door knocking about IIRC
no probs on the courier dan just let me know when ect, PM beardymatt he has a few door knocking about IIRC

