SI Board Batteries

Need technical Q/A then you're in the right place

Moderator: martauto

turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Tue Dec 06, 2011 9:49 pm

Can anyone tell me where I can buy the batteries that solder onto the Service Indicator Board, ideally is this country.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 06, 2011 10:00 pm

RS Components, or CPC-Farnell.
NiMH batteries can replace NiCd ones, and go for AAA or 2/3AA ones to give you some spare room to attach wire links at the end of the batteries, since I can't find any with the same tag pattern as the originals.
turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Tue Dec 06, 2011 10:01 pm

Thanks.
turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Tue Dec 06, 2011 10:09 pm

I presume the best option is to de solder the little tags on both ends of the batteries. Or do you suggest de soldering the tags from the board itself and buying batteries with the tags already fitted to the batteries.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 06, 2011 11:18 pm

You need batteries with tags already on them. They are spot welded to the battery, and are 'tinned' so that solder will flow on them. The batteries themselves are not a solder friendly metal, without a special flux, and the heat will probably damage them anyway.
Solder short pieces of 15A fusewire or similar onto the batteries, then thread the other ends of the wires through the circuit board.
Make sure you know which way around the batteries fit before you remove the old ones.
turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Tue Dec 06, 2011 11:19 pm

OK thanks.